- Drilling and Tapping Info For Newbies
- Winterizing your ski?
- GPR graphics for all years
- Best way to install pistons
- Checking indexing on your crankshaft
- Make your own impellor gauge.
- Dual Fuel Supply Diagram With Return.
- HOW TO UPGRADE THE GP1200R WITH THE 2'' EXTENSION.
- Looking for paint codes or formulas
- GPS and camera mount.
- Safety glasses for the lake.
- Parts sites.
- Pig Mats
- Acronyms related to the GPR.
- 2005 PUMP CONVERSION PARTS LIST.
- Rules and Regs: Locate your state, and post.
- Trailer: Gas Can Racks and boxes.
- handlebar installation
- Weighted fuel clunks.
- GPR Triple Cooling Setup
- Stud repair in hull of GPR
- prop bending tools
- PUMP TUNNEL REINFORCEMENT KIT
- AFTERMARKET BARS WITH STOCK TRIM ASSEMBLY
- PVC FREE FLOW PICS
- Gas Valves Leak Fix
- PAINT
- sticker-decal removal
- Eastwood Co.'s Hot Coat System/updated with link
- Diy pump tunnel reinforcement.
- SHIPPING SKIS
- hydro turf..removal of rub rail
- MARINE 5200 - MANS BEST FRIEND ON A PWC
- MAJOR MOLD INCONSISTANCY IN THE R&D RIDE PLATES
- PUMP SHOE NOT ALIGNED ON GPRS WITH THE 2'' EXTENTION
- 2000-2004 Pump / 2005-2006 Pump / 8 Vien Skat Pump
- 03/04 MOTOR- WHAT IT LOOKS LIKE PUT TOGETHER OUT OF THE HULL
- DELTA FORCE NANDO REEDS WITH SPACER PLATE
- NOVI CARBS - BREAKDOWN
- AFTERMARKET HANDLEBAR WITH STOCK TRIM ASMBLY (PART 2-DETAIL)
- FIXING THE R&D RIDE PLATE "DIP" (MANUF. DEFECT
- PET 2100DX installation instrunctions
- PURPOSE OF A FLYWHEEL ON PWCS
- PWC TRAILER BOX AND 6-CAN GAS RACK
- PET TACHOMETER 2100DX INSTALLATION
- EFI CONTROLLER INSTRUCTIONS (USAGE, NOT INSTALLATION)
- Pump sealing pics.
- GPR WARNING CODE DESCRIPTIONS
- R&D D-PLATE INSTALLATION INSTRUCTIONS.
- GPR Tech tips with pictures from CajunDude
- GPR FUEL TANK MODIFICATION.
- REDNECK EXHAUST PIPE CHROMING (I GOT CARRIED AWAY)
- OEM BILGE PUMP WITH ONE WAY CHECK VALVE
- PWC DEPTHFINDERS (ANYONE EVER USED ONE??)
- Yamaha Manuals/Parts Catalogs/Assembly Manuals -Russia
- PetTach 2100 Quickstart
- V-Force intake manifold gaskets
- How to Read Spark Plugs
- Polishing Plastic
- What Cavitation is !
- Definition of Squish !
- Sponson definitions by Carl Camper
- FREE FLOW EXHAUST INSTALLATION INSTRUCTIONS.
- GPR Engine Coupler Removal
- Looking up your Yamaha OEM part number
- throttle cable slack
- SST and Brass Fittings...
- Want to get all of the last 24 hours worth of post at once?
- ONLINE ENGINE COMPRESSION RATIO CALCULATOR
- CHANGES IN ENGINE COMPRESS RATIO UPON ENGINE PERFORMANCE
- COMPACTIVE DISCHARGE IGNITION OPERATION (CDI)
- PURPOSE OF THE STATOR (HOW IT WORKS)> COOL SITE!
- PURPOSE OF THE POWERVALVES
- Understanding Marine Corrosion
- Corrosion Inhibitors / Spray Lubricants
- CARB TUNING FROM WWW.HOWSTUFFWORKS.COM
- Understanding Drag Coefficient
- Gasket Making
- changing impeller
- PROGRAMABLE FUEL MAPPING FOR EFI (INFO FROM CHIP)
- Questoin about pump
- ACCELERATOR PUMP ADJUSTMENTS (FOR THOSE THAT HAVE THEM)
- Proper Battery Maintenance
- new shop stand smw style
- R & D ride plates
- R.A.D. RELATIVE AIR DENSITY CALCULATORS.
- Average Hours for 03 gpr?????
- Nuts and Bolts
- PWC DEPTHFINDER INSTALL PICS
- For those buying these new "polished plates"......
- JETWORKS INSTALLATION INSTRUCTIONS (PDF FILE) FROM FERNANDO
- Plastic Welding & Fuel Sending Unit Repair Info
- Mikuni Carb Spring Color and Gram Association
- pressure tests
- Question? Oil pump block off.
- 800 & 1200 INTAKE GRATE DIFFERENCES WITH PICTURES.
- AWSOME JETWORKS MOD INSTALLATION DRAWING
- Engine removal and installation links
- Plastic Truck Storage Box Mounted on PWC Trailer
- Cheap GPR Touch Up Paint (White)
- how to ship a waverunner
- Flame Arrestor
- Hose Clamps !
- 10 TIPS ON TIGHTENING HEAD BOLTS!!!
- Gas valve install?
- Will my 05' 1300 Riva ride plate fit an 03' 1300?
- RIVA GAS POWER VALVE INSTALLATION INSTRUCTIONS.
- FORUM RULES - EVERYONE PLEASE READ.
- HOW TO SET YOUR EFI CONTROLLER...
- JIM'S CONTACT INFO (RIDE PLATES)
- yamaha blue color code
- Image Hosting Links (Posting Pictures)
- Tips on VF3 installation
- UNDERSTANDING ENGINE TIMING (BASIC RULES) !!
- Definition of Pre - Detonation (ABNORMAL COMBUSTION)
- YAMAHA Engine Codes
- FREE Tunnel Reinforcement Template DOWNLOAD !!
- Which Tiny Tach to use??
- NOVI CARB (FUEL LINE ROUTING)
- STEP by STEP - One alternative to building a fast rec ski.
- PREMIX FUEL/OIL CALCULATOR
- LINK TO KERRY HIBDON INFO:
- how to NOT change your wheel bearings
- How A Two-Stroke Engine Works
- How a Four Stroke Engine Works
- 3 Degree Keyway Install Position
- Perfect match gel coat repair
- Polaris SLT780
- Air separator install
- INTAKE GRATE 2BAR OR SINGLE BAR.
- Protecting your keys, wallet, phone, and camera at the lake.
- Picture for your scrap books
- how do you get the glue off for pump shoe brackets??????
- rear intake grate bolts
- Pressure Testing Two Stroke Engines
- Proper Engine Compression Testing !!!
- Rebuilding your VF3 reed cages
- Stepping your Sponsons, made easy!
- efi info
- ~ All About Spark Plugs ~
- ~ R&D / RIVA CDI Instruction Manual ~
- YAMAHA OEM to PRO-X Size comparison GP1200R
- Cylinder Nikasil Plating companies
- How to set efi settings ?
- Trueing Hull (whats needed)
- how do you add avatar
- Prop bending tool?
- Pressure Testing Tripple Pipes
- Squish Testing
- Bolt "Stretch" VS. Torque Specs
- Race Gas / Pump Gas Mixing Chart
- Pistons for Cylinders
- pulling flywheel tip
- Checking and/or packing a "sealed" bearing.
- Simple homemade water extraction tool
- VF3 Gasket tip
- RED Pot on EFI
- VF3 Help
- Pump Assembly
- Intermediate Shaft Removal
- Battery Relocation How-To
- Engine & Carburetors Assembly Instructions
- Plug Change In FX (4 Stroke) How to -
- Measuring Ride Plate Angle
- Screw Size for Sponsons
- Bearing Housing Problem
- ADJUSTING DRIVELINE COUPLER SPACING
- 98 gp1200 clogged fuel line, where to start?
- Converting Fractions To Inches & Vice Versa
- Want To Re Mount Electrical Box GP1200R
- How do I measure cylinder head volume?
- efi
- How To Replace a Plastic Pump Liner
- Antifreeze & The GPR (For those of us that have to!!)
- 2003 model GPR hull specs
- GP1200R Low-down flat spot
- How To Install R&D Pump Tunnell Reinforcement
- ideal prop rpm..
- advice on cleaning ski's after salt water use
- JetWorks install - Fercho Version
- GPR Engine Assembly Instructions (PDF)
- Removing a sealed 5200 pump shoe
- Free Flow ?
- Complete list of engine codes?
- PET-2100DX Tachometer "Quick Start" Manual
- PET-2500 Tachometer "Quick Start" Manual
- Factory Pipe Triple Pipes
- Engine Warning Codes and Engine Type Codes
- Fiberglass/SMC Repair
- Piston Lock Tool
- Road cover
- problem help please put hole in hull
- 1994 waveraider stalled is it the low speed screw?
- Primer Plunger Rebuild
- 2002 GPR Steering question
- 1300r engine removal help!!!
- Power Valve ??
- fairings/cowlings
- XLT Bilge Pump Installation (Pics included)
- need help with wrist pin and bearing
- About XLL/XLT's
- 1200r wrist pin same as 1300r wrist pin?
- 2003 $1500 gp1300R
- Inside a Slant Detector
- what would you do
- Pressure Testing Triples
- Where to buy trailer fenders
- Can You Use Other Types Of Couplers On A Gp1300r
- Thinking of an old C/F hull?
- how do i adjust oil injector
- what should I do.....1200/1300
- 1200vers1300
- ride plate incerts / burned the plug and drain
- Need A Measurement
- Easy "stuck" pump removal
- Muffler Assembly
- Cheap safe clean up.
- New tools
- Waverunner trailer
- Pop-off pressure
- Fuel Injector Animation
- Mikuni Carb Owners Manual/Service Guide
- Oil pump cable adjustment GP1200r
- prop bending 101
- break in oil ratio
- 1200 gpr i need the adapter to run
- how to adjust PV cable?
- cleaning PVs?
- power valve couplers
- Moving Throttle from Right Side to Left Side
- primer plunger mounting
- normal powervalve cycling??
- Cat temp block off
- 07 FX HO Break In
- Definition of SMC
- Fuel Line Routing
- Paint hull
- The mystery of detonation
- exaust intake / 1200 gpr to cyl
- Synthetic Oil 05 FX HO
- pump tunnel 2007 gp1300r
- stinger3 question??
- FX160 ho Crusier
- What to use to seal pump assembly?
- Engine Break In/first Start Up?????
- 2002 GPR Face Lift
- gpr1200 throttle shaft rebuild
- Help On Headbolts Please!
- splash guard
- ANYONE HAVE (miller heads) NUMBER