Search:

need to know what size pump as well.get the # listed on the prop,should be enough to go on

my pro use to do that with a weakish battery,once i installed an agm style no more issue

might be able to hook you up.

stock nu-jet style

removed from the 700 virage $55.00 shipped

301699301700did some runs at the river.----54.6 mph on gps.3 bars of fuel.done with the 6 wedge on this ski.around 25-30 its tough to keep it from bobbing the nose.new flame arrestor adapters seem to...

1243cc motor and pipes,yeah baby!!!!

301683yes.about 4 hours run time on this setup

long block with 1050 full circle crank,compression #'s are 140 mag,150 cen,145 pto.have video of compression test and motor running.comes with stator and 2 other 1050 stators,hot seat cdi in complete...

complete set of factory pipe triple pipes for slxh,slx setup.currently on a running ski.first $600.00 plus shipping.comes with 3 jetworks valves.

is that stuff biodegradable??

i meant adding another cable up front to limit the rearward movement.i fashioned a cable with a self closing loop hook.simply pulling up the inclined ramp with only the front winch attached would net...

neither my pro1200 or either of my virage txs had it only the virage had it.partsland doesn't even show a t-stat for the 00 pro1200,virage tx,slx or genesis.but the 01 do show it

the carbed 1200's don't have a t-stat or pop-off,maybe the x-45 does.the shim was to keep the pop-off closed all the time and make the t-stat do ALL the temp regulating.the fi stuff is suppose to be...

i had to do the jumper on 2 of them,the third one was already done.that one had the cdi go bad,and when i put the new cdi in it wouldn't fire until i undid the jumper wire and put it back original

not sure that post clearly says that the 785 still makes 200hp on the pump gas domes.i don't see a 785 making 200 hp on 92 octane.hell you'd be lucky to get 200 hp with 180-200 psi race gas...

sold

i had these at one time and my skis would just slide back off the bunks unless somebody was up front to hook the winch up.also highly recommend another strap to secure the skis,if that winch lock...

sorry but i've had 3 2000 models that had the problem.

sounds like the dreaded cdi jumper wire is needed.

the dreaded cdi jumper wire needed???cdi thinks its already running and won't allow the starter to be engaged

have the carbs been cleaned???

buddys got one.make offer shipped

all hail casey!!!!always comes thru with great info.

i'm more curious as to what sleeve was put in there,seeing as how the msx is a triple port exhaust i haven't heard of anybody having a proper sleeve for the msx.