Search:

Type: Posts; User: Motohead

Search: Search took 0.03 seconds.

  1. Replies
    26
    Views
    1,678

    This guy is well respected and dose specialty...

    This guy is well respected and dose specialty work

    http://www.thehighspeedlab.com/
  2. Replies
    16
    Views
    695

    I had a 260 with a factory cover I traded it in...

    I had a 260 with a factory cover I traded it in on a 300 and kept the cover. My 260 cover fits but is tight across the bars (the 300 has wider bars)and is starting to pull the seam apart. It seems to...
  3. Thread: 96 zxi 900

    by Motohead
    Replies
    2
    Views
    267

    Welcome to the forum you have a classic I bought...

    Welcome to the forum you have a classic I bought my 900zxi new in 96 and after 4 sinkings multiple hull repairs long weekends of wide open running by multiple inexperienced drunken riders (55 gallons...
  4. Replies
    8
    Views
    214

    This will work

    I have had the same problem with a motorcycle if you can get the busted plug out it can be fixed W/O removing the head using a helicoil

    http://www.popularmechanics.com/cars/how-to/repair/4212608
  5. Replies
    3
    Views
    212

    Done deal

    Probablly not the best deal but its done they gave me 8,000 trade in but wouldent move off the 14,999 MSRP included prep

    In the first photo you can see the "old" ski in the background
  6. Replies
    3
    Views
    212

    Whats It Woirth

    I have a 2009 260X un-modded fresh water adult ridden with 39 hours on the clock. Located in Missouri it has 2 years left on the good times plan extended warrantee. I'm thinking of traiding it in...
  7. Replies
    36
    Views
    2,506

    I dont know but I suspect the Idel controler...

    I dont know but I suspect the Idel controler motor controls the smart steering to.
  8. Replies
    2
    Views
    815

    Make sure your getting enough water into the...

    Make sure your getting enough water into the exhaust track Check for blockage also make sure your not running way lean check your plugs for lean burn .
  9. Replies
    12
    Views
    809

    So after 20 hours if its just casting junk I...

    So after 20 hours if its just casting junk I should not get much more I'm going to run it for 5 hours and check the filter again. Dose that sound like a good plan?
  10. Replies
    12
    Views
    809

    Thanks for the info I just ordered a test kit...

    Thanks for the info I just ordered a test kit from them.

    I think I'm going to run it a little bit (5 hours or so) and pull the oil and cut open the filter again to see if I get any more metal....
  11. Replies
    12
    Views
    809

    Where should I shop? The extended warranty from...

    Where should I shop? The extended warranty from the dealer is close to 900.00 I guess I should buy one before I take it to the dealer?
  12. Replies
    12
    Views
    809

    where can I get it tested? What about the metal...

    where can I get it tested?
    What about the metal in the filter and the tappit noise
  13. Replies
    1
    Views
    593

    900 to 1100 ZXI

    I have a 900 Zxi that was jumped once to many times and the hull delaminated I have found an 1100 Zxi with a good hull but blown up motor what engine parts interchange? Can I take the top end off the...
  14. Replies
    12
    Views
    809

    First oil change. Manual says every 50 hrs or...

    First oil change. Manual says every 50 hrs or each year whichever comes first
  15. Replies
    12
    Views
    809

    Gas in Oil Metal in filter

    Well It happened to me! 2009 260X 20 hours still under warrantee, How should I approach the dealer with this?

    Link to oil sample
    YouTube - 2009 Kawasaki 260X Gas In Oil!!

    Oh and there's a...
Results 1 to 15 of 15