Search:

I was running the Spintech Pro Muffs and they sounded legit, loud but clean, always had peoples necks snappin trying to find out where it was coming from LOL ... Have to turn the DOD off with the...

Why not just change the plug on the harness to fit the yamaha plug, the connectors can be found on eastern beaver. The ski won't know the difference, even if the pressure is different it's nothing a...

It might be water transfer. That is a sweet process.

Sean

Almost a year and a half old bump,

Sean

What Steve was saying is that the hole was caused by something did you fix the reason the coupler got a hole in it. For high vibration you can use blue loctite or RTV (which is what I use on almost...

It's a belt driven centrifugal blower, I'm working out the specifics of it now. I should be able to have it bolt on with no mods to the motor casings using existing bolts. I'm working out the gear...

The only problem with the 15f bottom is It can't handle the chop like a px. They need a a hull between the ultra and 15f[/QUOTE]

Maybe a stock 15f bottom ;)

Sean

Basically the "kit" would consist of my brackets and other custom hardware to mount and run the supercharger, a tune if that is what you want to run for the ecu vs a new ecu or CMD. A pulley, and...

Nothing is set in stone yet but I am in the planning stages of putting something together if I can make the money work on it, ECU would be a reflashed stock setup or a standalone or hopefully the...

Do you still have issues starting and at idle?

Sean

Check the thread in my signature.

Sean

They are stable unless you have 3 large people on them or an inexperienced riders. I have ridden mine in seriously bad water 2 up and never come close to rolling it. I come off the ski way before it...

Steve is using my favorite motor in a fun hull which should be done soon. It's very cool, hopefully he will share more. Nice work as always,

Sean

Yep, all safe in Houston, it's sunny and 75 f. I'm hanging out in the parking lot about to graduate with my first degree.


Sean

You know nothing, you ride a yamaha :D

Sean

Do you need the female side? I have one now. Post exactly what you need and I'll make one up for you. I have both sides of that connector and the terminals.

Sean

Post a picture of the connector I may know where to get it.

Drain and clean the tank and verify the fuel pump works to start.

Sean

Corey I used an autometer marine carbon fiber short sweep oil temp gauge on mine, worked fine depending on where you put the sensor. I had mine on the oil cooler where the pressure switch is and...

Your hand. Yes I'm serious.

It's really weird.

Sean

It's usually at home depot or Lowe's for around $5 a can. Just play with it, it's dead simple.

Sean

Ok thank you that is what I thought.

Sean

Shame on you Mr.Steve lol I'm just as guilty.

Sean

The angle might work but it would make the ski want to nose down, you may end up with quite a shim under the front motor mounts though.

If the sump looks like you can cut it then I'd do that.
...

That's really cool, great Idea.

Sean

I had a bearing that went bad (without my knowing it) while pulling at 80 and didn't notice it until I stopped. The cages were blown out on both sides of one hub and I was running just on metal to...