Thread: Seadoo 4 TEC No Start
07-15-2009, 11:43 PM #1
- Join Date
- Jul 2009
- NJ. Shore
Seadoo 4 TEC No Start
Will not crank or start... have 2004 4 TEC Seadoo Jetboat. I just had the dealer replace the shift cable on Saturday. Monday I dropped it in the water and it ran briefly then within a second or 2 I heard a quick warning alarm buzz and it shut down. I tried to start it pushing the start button and I get nothing. I'll check the fuses and battery connections. But from there I don't know. Since the shift cable was replaced could the boat think it's in gear and won't allow it to be started?
Thanks in advance for your help.
Last edited by Jeff Chandler; 07-15-2009 at 11:46 PM. Reason: mispelling
07-16-2009, 06:51 AM #2
Jeff does your jet boat have a DESS post or a key to start. If it has a DESS post is it beeping when you plug it? If no DESS post check the battery for proper voltage and the fuses to make sure they are not corroded. If you can take a reading of the starter relay for contunuity.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By elmatta in forum Sea Doo Open DiscussionReplies: 7Last Post: 06-02-2014, 06:01 PM
By rxpx2008 in forum 2-Stroke PerformanceReplies: 16Last Post: 09-15-2009, 03:06 PM
By sk8elenex92 in forum 2-Stroke PerformanceReplies: 1Last Post: 09-03-2009, 05:34 PM
By chippy in forum 2-Stroke PerformanceReplies: 1Last Post: 07-10-2009, 08:54 PM
By bigbird in forum Sea Doo Open DiscussionReplies: 1Last Post: 07-20-2007, 03:45 PM