have 1996 sltx 1050,I have a bog from 2400 to 4000rpm,the engine and carbs are dealer rebuilt,when i pull off the plug wire closest to the back there seems to be only a slight change in rpm,The engine will run on one plug on the other two cylnders.I seem to have good spark and i have fuel.I have decided to replace all the parts that i have not done so far.This is what i need .
1.cdi box
2.Ignition coil
3.spark plug wire set
4.reed valves
5. float for fuel system
6.pop of valve and gasket
thank you...jim [email protected]
I live in london ontario canada...N5X4M4