08-01-2006, 09:42 PM #1
Jetworks hose + duckbill question.
Ok, first, with the duckbills, should I ziptie them to the metal screw in parts, so that they dont fall off. I am worried that they will fly off at high speed or jump landings.
And second does this jetoworks hose look fine? -
08-01-2006, 09:44 PM #2
08-01-2006, 09:46 PM #3
ANd what about the hose, does it look like its restricting water flow?
08-01-2006, 10:46 PM #4
- Join Date
- Apr 2006
- South MS
That hose should be ok, but take a look at he stock rubber hose and make sure its not kinked. Its kind of soft anyways. This is if you are using the siphon bilge hose from the pump.
Mine some how became kinked and blew out. This caused my sound suppression box to melt and I almost lost my ski. It started sinking so fast, in less than 2 minutes water had filled all the way up to the heads before I made it to land
08-02-2006, 12:31 PM #5
08-02-2006, 12:42 PM #6
- Join Date
- Nov 2005
- Lafayette, La.
Same thing happened to me.
08-02-2006, 07:06 PM #7
What type of hose are you guys using as a replacement?
08-03-2006, 06:59 AM #8
I replaced it with 1/2" heater hose from Murray's Auto Parts.
08-03-2006, 09:38 AM #9
DId you guys still use the reducer barb with new hose? If not how did it work, without it?
08-03-2006, 10:27 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By soulraver in forum MSX/MatrixReplies: 2Last Post: 02-23-2012, 06:52 PM
By pittperson in forum Sea Doo Open DiscussionReplies: 6Last Post: 01-28-2012, 02:19 PM
By Zanerica in forum 4-Tec PerformanceReplies: 0Last Post: 08-27-2009, 05:14 PM
By DooMeister in forum 2-Stroke PerformanceReplies: 9Last Post: 11-07-2008, 06:19 PM
By PuprleNuprleGPR in forum Yamaha How To & FAQsReplies: 8Last Post: 06-29-2008, 04:52 PM