Results 1 to 9 of 9
  1. #1
    tomgtv's Avatar
    Join Date
    May 2006
    Location
    Weston Florida (Ft. Lauderdale)
    Posts
    1,744
    +1
    1

    Pump Bearing source?

    Hi guys,
    Probably been covered before but maybe someone has a quick answer.
    I want to do a preventative maintenance on my pump bearings.

    Looks like 3 rubber seals and 2 bearings to do job? Right?

    Riva has the seals, but no bearings. They want $18 for each rubber seal
    and $27 for one bearing and $16 for the other.

    Does any of the tuners have this stuff in stock for resale??

    I don't seem to be experiencing any issues at 200 hours on an 07 Ultra, but
    I don't like what I've been reading here!


  2. #2
    Fat Man, Little Boat Region8Ultra250X's Avatar
    Join Date
    Jun 2007
    Location
    Jersey
    Posts
    5,563
    +1
    169
    PM BLUULTRA250X scott has a complete set of bearings i gave him that he hasn't used.... get him to send them to you.... they were cheap so just pay him for the shipping and your fine

  3. #3
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,992
    +1
    455
    Quote Originally Posted by Region8Ultra250X View Post
    PM BLUULTRA250X scott has a complete set of bearings i gave him that he hasn't used.... get him to send them to you.... they were cheap so just pay him for the shipping and your fine
    +1

    I do. Let me know where you need them sent.

    Quote Originally Posted by tomgtv View Post
    Hi guys,
    Probably been covered before but maybe someone has a quick answer.
    I want to do a preventative maintenance on my pump bearings.

    Looks like 3 rubber seals and 2 bearings to do job? Right?

    Riva has the seals, but no bearings. They want $18 for each rubber seal
    and $27 for one bearing and $16 for the other.

    Does any of the tuners have this stuff in stock for resale??

    I don't seem to be experiencing any issues at 200 hours on an 07 Ultra, but
    I don't like what I've been reading here!
    200 hours???? nice! Some ultra owners have been getting the notorious crank float...... Give this a try.


  4. #4
    tomgtv's Avatar
    Join Date
    May 2006
    Location
    Weston Florida (Ft. Lauderdale)
    Posts
    1,744
    +1
    1

    Wow!

    Quote Originally Posted by BluUltra250x View Post
    +1

    I do. Let me know where you need them sent.



    200 hours???? nice! Some ultra owners have been getting the notrious crank float...... Give this a try.

    That's enough to scare you! Is that pump bearing related? As I understand it when the pump bearings go they affect the thrust bearings in the motor then it's boom time! I do have the 5 yr warranty, I assume it would be covered. I don't push this jetski.........in fact we were riding in Ft. Myers beach over the weekend and a group decided to take a 50 mile trip. I was at half tank so I kept it out of the boost, about 5000 rpms and 30mph. Amazing.....it hardly used any gas. I guess I emulated an LX without supercharger.....

  5. #5
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    not pump bearing related 80hrs on ski

  6. #6
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,992
    +1
    455
    I sent 3 bearings. 2 for the pump and 1 for the thru hull.

  7. #7
    Fat Man, Little Boat Region8Ultra250X's Avatar
    Join Date
    Jun 2007
    Location
    Jersey
    Posts
    5,563
    +1
    169
    Quote Originally Posted by tomgtv View Post
    I don't know if you like beaches, Jetskis and bikinis.....but we will hook you up when you're down.......the pix attached are from May in Islamorada, FL keys.
    The ladies love to ride them superchargers......
    i am coming down the end of september for my b-day..... might have to re-think my travel partner plans after seeing those pics.....

  8. #8
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,992
    +1
    455

  9. #9
    JET250's Avatar
    Join Date
    Jan 2008
    Location
    Australia mate fair dinkum.
    Posts
    1,278
    +1
    2
    I'm flying over next week now.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New 05 pump/bearings too tight?
    By washingtonrider in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 07-02-2006, 01:19 PM
  2. Oil in pump bearings?
    By r33pwrd in forum Yamaha PWC Performance (2-stroke)
    Replies: 31
    Last Post: 05-23-2006, 01:25 PM
  3. pump bearing grease
    By dhoad in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 02-23-2006, 05:12 PM
  4. pump bearing mod
    By Top banana in forum 4-Tec Performance
    Replies: 9
    Last Post: 02-13-2006, 06:11 AM
  5. Which pump bearing mod is best????
    By RXPDAVID in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-31-2005, 12:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •