Thread: sl 750 carbs
07-22-2009, 12:20 PM #1
sl 750 carbs
does any one know what size jets are used in the 750 sl motor need asap thanks an whats the pop off pressure for that ski too ty
07-22-2009, 03:00 PM #2
- Join Date
- Jul 2007
- near Toronto, Canada
Jets may not be that same on all model year SL 750 carbs...
What does the service manual say for jetting after 1993?
1993 SL 750 (from 1996 service manual)
Mikuni SBN 38-34mm
Main jet: #77.5
Pilot jet: #72.5
High speed screw: 7/8 MAG 1/2 CEN 5/8 PTO
Low speed screw: 1/2 turn
Idle speed in water: 1250RPM
Pop-off pressure: 10-18PSI
07-22-2009, 05:38 PM #3
- Join Date
- Oct 2006
- Cleveland OH
Years are different.
What you seek is in the tech section or on-line manual.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ZOMGVTEK in forum Polaris ClassifiedsReplies: 5Last Post: 08-17-2008, 09:53 PM
By jared4brack in forum Polaris SkisReplies: 0Last Post: 08-13-2008, 06:31 PM
By quad2water in forum Polaris How To & FAQsReplies: 1Last Post: 06-21-2008, 11:37 PM
By MetallikatZ3 in forum Polaris How To & FAQsReplies: 12Last Post: 08-31-2007, 11:16 PM
By scottr2200 in forum Polaris Open DiscussionReplies: 1Last Post: 07-16-2007, 12:03 AM