Results 1 to 2 of 2

Thread: Redo cylinders?

  1. #1
    SpeedFreak
    Join Date
    Jul 2008
    Location
    Fond du lac Wisconsin
    Posts
    220

    Redo cylinders?

    I know number 2 needs redone but does 1 and 3? There is scratches on the pistons and cylinder walls of 1 and 3 as well.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P7220004.JPG 
Views:	53 
Size:	847.5 KB 
ID:	142906   Click image for larger version. 

Name:	P7220005.JPG 
Views:	52 
Size:	882.6 KB 
ID:	142907   Click image for larger version. 

Name:	P7220006.JPG 
Views:	60 
Size:	858.4 KB 
ID:	142908   Click image for larger version. 

Name:	P7220008.JPG 
Views:	57 
Size:	822.1 KB 
ID:	142909  


  2. #2
    PolarisNut's Avatar
    Join Date
    Dec 2006
    Location
    Lower Michigan
    Posts
    1,809
    Good rule of thumb about nikasil...if you can catch your fingernail in the scratches/gouges, then it will have to be replated. Keep in mind, the plating is less than .005" thick, so it doesn't take much to break through.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. rxp cylinder compression
    By buddydoo in forum 4-Tec Performance
    Replies: 16
    Last Post: 05-31-2006, 05:22 PM
  2. GP1200R Ltd - front cylinder misfire problem
    By Flywheel in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 05-18-2006, 10:05 AM
  3. 1300 cylinder needed!
    By GPR FL in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 04-03-2006, 02:03 PM
  4. lost compression on all cylinders
    By mxl16 in forum 4-Tec Performance
    Replies: 36
    Last Post: 12-03-2005, 05:15 PM
  5. Dropping cylinder?
    By Prez in forum 4-Tec Performance
    Replies: 9
    Last Post: 08-04-2005, 09:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •