Results 1 to 8 of 8
  1. #1

    Join Date
    May 2009
    Location
    nyc
    Posts
    684
    +1
    7

    raider primer kit install

    how exactly do i install this riva primer kit into my raider 700? where do i install the fittings? the lines i have figured out, but help me out with what to do with the chokes. i know i remove the plates, but do i take the whole shaft out, and then put the fitting in in its place? what holds it in? if this was carb work on a banshee, i could do it in my sleep, but im new to skis and dont want to get stuck out on the water.


  2. #2
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,154
    +1
    170
    Quote Originally Posted by official_style View Post
    how exactly do i install this riva primer kit into my raider 700? where do i install the fittings? the lines i have figured out, but help me out with what to do with the chokes. i know i remove the plates, but do i take the whole shaft out, and then put the fitting in in its place? what holds it in? if this was carb work on a banshee, i could do it in my sleep, but im new to skis and dont want to get stuck out on the water.


    Remove the choke plates and then knock out the bushings and install the primer fittings in there. Take the "ON" line and put your "T" there and run the ski on reserve.

    M

  3. #3

    Join Date
    May 2009
    Location
    nyc
    Posts
    684
    +1
    7
    do the brass fittings usually stay in the carbs, just by being pressed in, or should i paint over them, or use something else to glue them in?

  4. #4
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,154
    +1
    170
    Tight fit....I've never had them come out....I just tap them in and forget about them!

    m

  5. #5

    Join Date
    May 2009
    Location
    nyc
    Posts
    684
    +1
    7
    cool, thx for the help! i am just waiting on my zip tie gun, so i can put new oil lines on and im ready to go.

  6. #6
    TempoGT's Avatar
    Join Date
    Apr 2008
    Location
    Montreal QC
    Posts
    385
    +1
    1
    I'm looking to also go to a primer over choke setup, and I wanted to know if a kit that will fit "Super BN 38/44/46mm carbs found on most Yamaha skis" would work with a 701 61x. I know I have a single 44, but is it a Super BN?

    I'm not looking at a Riva kit, I was looking at fleebay (http://cgi.ebay.com/ebaymotors/Kawas...4506.m20.l1116)

    Dave

  7. #7
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    Quote Originally Posted by TempoGT View Post
    I'm looking to also go to a primer over choke setup, and I wanted to know if a kit that will fit "Super BN 38/44/46mm carbs found on most Yamaha skis" would work with a 701 61x. I know I have a single 44, but is it a Super BN?

    I'm not looking at a Riva kit, I was looking at fleebay (http://cgi.ebay.com/ebaymotors/Kawas...4506.m20.l1116)

    Dave
    That will work! For thought I have always used J-Bweld on my install's.Lee

  8. #8
    TempoGT's Avatar
    Join Date
    Apr 2008
    Location
    Montreal QC
    Posts
    385
    +1
    1
    Thanks Lee! Will be ordering it soon.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. primer kit install question XLL1200
    By kaarona1 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 06-18-2009, 04:05 PM
  2. Ultra 150 Primer Kit Install?
    By turbo17 in forum Kawasaki How To & FAQs
    Replies: 8
    Last Post: 06-15-2009, 12:28 PM
  3. Triple Mikuni 38 Primer Kit Installation
    By kingstretch in forum Yamaha Old School Skis
    Replies: 9
    Last Post: 08-12-2008, 01:23 PM
  4. '96 ZXI 1100 Primer Kit Install ?
    By bcgriff in forum Kawasaki Open Discussion
    Replies: 3
    Last Post: 08-05-2008, 09:20 AM
  5. URGENT !! Primer Kit install ?
    By maguyver in forum Yamaha PWC Performance (2-stroke)
    Replies: 39
    Last Post: 09-24-2007, 11:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •