Results 1 to 5 of 5

Thread: polaris 750 slt

  1. #1

    polaris 750 slt

    New guy here with two non running '95 750 slt skis. I have gone through both and followed the schematics closely. Still no spark in either. New batterys , new cdi's rechecked all wiring, ect. the only thing I am missing is a multi function gauge in both and some of the local boat gurus here say I have to have them to run my boats. Is there a bypass I can make to run without??


  2. #2
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    Welcome to the Hulk Knine.

    No you don't need an MFD to make it work.

    Have you bypassed the kill switches?

    Do you have the grounds correct inside the elec box? The ground must jump from the LR23 to the coil hold down, then to the stator.

    Make sure the engine plate is clean and tight where the ground wire connects to it.

    Try cutting the plug wires back about 1/4" to expose fresh wire and rescrew the plug boots back on and zip tie them in place..

  3. #3
    la90043's Avatar
    Join Date
    Oct 2006
    Location
    Los Angeles
    Posts
    1,201
    Maybe connect the lanyard no?


    Quote Originally Posted by xlint89 View Post
    Welcome to the Hulk Knine.

    No you don't need an MFD to make it work.

    Have you bypassed the kill switches?

    Do you have the grounds correct inside the elec box? The ground must jump from the LR23 to the coil hold down, then to the stator.

    Make sure the engine plate is clean and tight where the ground wire connects to it.

    Try cutting the plug wires back about 1/4" to expose fresh wire and rescrew the plug boots back on and zip tie them in place..

  4. #4
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    Quote Originally Posted by la90043 View Post
    Maybe connect the lanyard no?
    I was going to mention that too, but the kill switch bypass would do the same thing.

  5. #5
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,591
    +1
    1,275
    Welcome

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. hard starts on 1995 polaris 750 slt
    By zakatak in forum Polaris Open Discussion
    Replies: 8
    Last Post: 07-19-2009, 11:13 PM
  2. 1995 Polaris 750 SLT "HELP"
    By Sasquach in forum Polaris How To & FAQs
    Replies: 3
    Last Post: 06-09-2008, 02:26 PM
  3. polaris 750 slt starter solenoid
    By neal233 in forum Polaris Classifieds
    Replies: 11
    Last Post: 05-27-2008, 06:29 PM
  4. polaris 750 slt questions
    By rko in forum Polaris Open Discussion
    Replies: 6
    Last Post: 07-15-2007, 04:40 PM
  5. Polaris 750 slt - Engine keep running
    By madseal7 in forum Polaris Open Discussion
    Replies: 15
    Last Post: 06-29-2007, 07:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •