Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1

    Join Date
    Jun 2009
    Location
    EAST COAST
    Posts
    41

    Talking Cant get pump housing off spx any ideas?

    EVERYTHING IS OFF.SEAL IS REALLY ON THERE,THANKS


  2. #2
    fireball451's Avatar
    Join Date
    Jun 2008
    Location
    Gray, TN
    Posts
    62
    Keep wiggling.
    You should finally get something to break loose.
    I usually get the bottom to come loose first.
    I will slip a thick washer behind one of the mounting ears and wiggle more.

  3. #3

    Join Date
    Jun 2009
    Location
    EAST COAST
    Posts
    41

    THANKS

    THANKS

  4. #4
    Sly Fox DKFox's Avatar
    Join Date
    Feb 2009
    Location
    Huntsville, Alabama
    Posts
    103
    Just checking here.... but you're sure you disconnected ALL the hoses on the inside of the craft that connect thru the hull to the pump?

  5. #5

    Join Date
    Jun 2009
    Location
    EAST COAST
    Posts
    41

    Yep

    there isnt 1 thing attached all striped

  6. #6
    2000 GPRXP 4tec shooter98xpl's Avatar
    Join Date
    Dec 2005
    Location
    Charleston SC
    Posts
    2,694
    +1
    3
    Old trick: Put a rope through the veins of the pump, tie to a tree. Make sure you have some front support on the ski (additional tiedowns). Pull auto forward, pump will fly off.
    SHOOTER

  7. #7
    SURFnTURF's Avatar
    Join Date
    May 2007
    Location
    Australia
    Posts
    845
    +1
    10
    Tie a nylon rope around the pump veins and then to a length of timber running (vertically)or some type of lever about 3ft long and then lever off the rear bumper .Have gotten alot off using this method.

  8. #8
    96XPSS's Avatar
    Join Date
    Feb 2006
    Location
    Warner Robins, GA Home of the 2007 All-Star Little League World Champions!
    Posts
    4,362
    Quote Originally Posted by shooter98xpl View Post
    Old trick: Put a rope through the veins of the pump, tie to a tree. Make sure you have some front support on the ski (additional tiedowns). Pull auto forward, pump will fly off.
    SHOOTER
    If you need a tree, Shooter will stand still for you.

  9. #9

    Join Date
    Jun 2009
    Location
    EAST COAST
    Posts
    41

    THANKS

    THANKS

  10. #10
    2000 GPRXP 4tec shooter98xpl's Avatar
    Join Date
    Dec 2005
    Location
    Charleston SC
    Posts
    2,694
    +1
    3
    Hahahahaha, nice one Robert,
    SHOOTER

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2000 xl1200 pump housing off?
    By rickbengel in forum Yamaha Open Discussion
    Replies: 2
    Last Post: 11-24-2012, 03:29 PM
  2. Xl 1200 pump housing off?
    By rickbengel in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 11-24-2012, 03:25 PM
  3. Help Cant get impeller off Ultra 150 Pump
    By Saltwater n Premix in forum Kawasaki PWC Performance (2-stroke)
    Replies: 23
    Last Post: 07-03-2011, 01:23 PM
  4. Help cant get ride plate off
    By j-wadd in forum Yamaha Open Discussion
    Replies: 12
    Last Post: 09-09-2009, 09:44 AM
  5. I need to get my RPM's up-Any ideas.
    By Mongoose in forum Yamaha Old School Skis
    Replies: 28
    Last Post: 04-27-2007, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •