Results 1 to 7 of 7
  1. #1
    novaboy's Avatar
    Join Date
    Dec 2008
    Location
    Mississippi
    Posts
    98

    Question about impeller removal

    Can you remove the impeller to chenge the wear ring without a table vice or vice period. I tried the freezer method with impeller still in and the wear ring does not budge.


  2. #2
    785xp's Avatar
    Join Date
    Feb 2006
    Location
    Canada
    Posts
    897
    +1
    7
    Which ski?

  3. #3
    novaboy's Avatar
    Join Date
    Dec 2008
    Location
    Mississippi
    Posts
    98
    its for a jet boat 1995 sportster to be exact.

  4. #4
    "Tearing it up on the water" seadoobutch787's Avatar
    Join Date
    Nov 2007
    Location
    Michigan
    Posts
    533
    You have to have something to hold on to the end of the impellar shaft when you take the nose cone off. A vice is needed to remove it and when you install it to torque it down.

  5. #5
    785xp's Avatar
    Join Date
    Feb 2006
    Location
    Canada
    Posts
    897
    +1
    7
    I don't have a vice but use a long breaker bar and an adjustable wrench. I usually have someone there to help me. The wear ring on the older pumps(like yours) needs to be cut out. Put the new wear ring in the freezer to install.

  6. #6
    Dr Len's Avatar
    Join Date
    Jan 2006
    Location
    New Jersey Attitude Capital of the World
    Posts
    1,170
    Dont forget New oil, O ring, Flange sealant, and some pipe sealant for the plug.

  7. #7
    KrunchovXPL-GTX-RX's Avatar
    Join Date
    Mar 2009
    Location
    Aiken, SC
    Posts
    1,391
    +1
    1
    That should be a 140mm pump. You do have to pull the prop and cut them out.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Son questions about impeller and intake
    By Taskolle in forum Honda Performance
    Replies: 0
    Last Post: 11-28-2013, 01:43 PM
  2. Question about impellers.
    By Honroman in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 09-13-2012, 07:47 AM
  3. question about impeller damage
    By charles81076 in forum Sea Doo Sport Boats
    Replies: 1
    Last Post: 06-11-2012, 11:51 PM
  4. Quick question about impeller and jet pump on 99 slth
    By cubsfan2516 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 03-16-2009, 11:19 AM
  5. quick question about impeller..
    By ryan*9 in forum 2-Stroke Performance
    Replies: 0
    Last Post: 01-04-2008, 11:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •