Results 1 to 8 of 8

Thread: 951xp resinator

  1. #1

    Join Date
    Aug 2009
    Location
    wv
    Posts
    25

    951xp resinator

    hey all will it hurt my performance or give alil if i take my resinator off and do the bypass on it and will it make it to loud to ride or sound just right? oh yea its a 01 951xp- bone stock


  2. #2

    Join Date
    Jul 2009
    Location
    Chester Va
    Posts
    56

    Resonator delete

    I removed the resonator on my 98GSXL with the 951 motor, it made it louder, didn't notice any change in performance


    David N

  3. #3
    I removed mine as well on a GSX limited with the 951. I had to do mine since the crack down the seam, almost sank my ski.
    (sometimes I wish it would have.)
    It sounds quite a bit louder, but no real performance inprovement.

  4. #4

    Join Date
    Jul 2009
    Location
    Chester Va
    Posts
    56

    resonator

    I removed mine for the same reason, all I could see on mine was the handle bars sticking out of the water, glad the water was shallow

    David N

  5. #5

    Join Date
    Jun 2007
    Location
    Sacramento CA
    Posts
    58
    I would like to do this on my 98 gtxl. Anyone got any pics or part numbers for hoses to do it ?

  6. #6
    I used 4 in PCV pipe in my 98 gsx limited.
    1 45deg
    1 4" spacer
    1 90deg
    connected using primer, and sealent to the proper angles to fit.
    That is probley the best mod t the ski...Never broke.

  7. #7

    Join Date
    Jul 2009
    Location
    Chester Va
    Posts
    56

    Resonator

    I used the hose & through fitting for a 98 XPL, had to grind the ears off the through hull fitting so it would face the front of the ski & to keep it from turning loose I put a couple of dabs of 2 part apoxy around the edge inside the hull after I tightened the outside nut, not sure if those parts will work on the GTXL but it worked on my 98 GSXL

    David N

  8. #8

    Join Date
    Aug 2009
    Location
    wv
    Posts
    25
    i just ordered the resinator bypass kit for PPG-75bucks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. epoxy resin...is this correct?
    By slowimport in forum Yamaha How To & FAQs
    Replies: 2
    Last Post: 04-30-2009, 10:06 AM
  2. anyone need fiberglass resin
    By fenn in forum Jersey Riders
    Replies: 17
    Last Post: 11-21-2008, 08:24 AM
  3. polaris resinator
    By rollot in forum MSX/Matrix
    Replies: 1
    Last Post: 08-04-2008, 08:18 AM
  4. Resinator delete - Pipe Info?
    By snowrunner in forum 4-Tec Performance
    Replies: 24
    Last Post: 05-08-2008, 11:04 PM
  5. epoxy over resin, or resin over epoxy?
    By bnovak in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 10-18-2007, 10:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •