08-05-2009, 05:57 PM #1
08 fxho intake grate instalation!!!!!!
im new to this....i just purchased the riva top-loader intake grate and im having a couple of issues taking off the stock one...i took off the old grate which was four screws but then there is another plate that has four screws to... does that have to come off and no its not the ride plate, because i tried taking off that plate next to the intake grate but i removed all four screws and its a little hard to take off. it look like it stuckon there with silicone or something... does that get puller off?? thanks. i will post some pics
08-05-2009, 11:29 PM #2
That is your pump shoe, you do not have to remove this if only doing a grate. Be careful when tightening those bolts up on the new grate. If I remember they torque to around 5.2 ft lbs. (or around 62 in. lbs)
08-06-2009, 05:07 PM #3
- Join Date
- Dec 2007
What you have to do is buy the correct intake grate for your slow FXHO!!!! and yes you have to take out the pump shoe to install the "pump seal kit".
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By fxho in forum Yamaha PWC Performance (4-stroke)Replies: 0Last Post: 08-05-2009, 05:42 PM
By WMFwatercraft in forum 4-Tec PerformanceReplies: 12Last Post: 06-06-2008, 05:07 PM
By FATSACK in forum 4-Tec PerformanceReplies: 9Last Post: 01-30-2008, 10:20 PM
By Suthrn in forum 4-Tec PerformanceReplies: 1Last Post: 04-01-2007, 09:29 PM
By shooter98xpl in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 12-31-2005, 02:24 AM