Thread: What sizes for T-bolts?
08-06-2009, 12:30 PM #1
What sizes for T-bolts?
Since my buddy has blown the exhaust hose twice off of his RXPX, I'm going to do a little PM to my PX and put T-bolts on the exhaust, SC, and, IC. I'd like to order the clamps right away, so if someone can tell me what sizes are required, I can order them all at once.
Thanks for the help!
08-06-2009, 01:37 PM #2
If you order from Silicone Intakes. 4- 2.5" SC- IC, 2- 4.5" exhaust, to do the whole exhaust on a stock PX 3- 2.75", 1- 2.5".
08-06-2009, 02:16 PM #3
Excellent, thank you very much. After thinking about it, I may not do the whole exhaust as I really want to ditch the resonator. I may just do the three at the waterbox and the SC to IC for now. Adding a resonator bypass would mean 2- 2.75" and 1- 2.5", right?
08-06-2009, 02:48 PM #4
Right. Last time I looked the clamps were running 2.60 EA. I have been running them for a year now. Note: Other places may size their clamps differently, but on Silicone Intake these are the right sizes.
08-06-2009, 03:20 PM #5
08-06-2009, 03:45 PM #6
08-06-2009, 04:12 PM #7
08-06-2009, 04:24 PM #8
- Join Date
- Oct 2005
I've had very good luck with the silicone intakes t-bolt clamps. They have held up very well.
08-06-2009, 04:58 PM #9
08-06-2009, 05:42 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By speeder in forum Sea Doo Open DiscussionReplies: 2Last Post: 09-05-2012, 06:45 PM
By 98gsxl951 in forum 4-Tec PerformanceReplies: 8Last Post: 06-06-2012, 10:08 AM
By akjose in forum Yamaha Old School SkisReplies: 1Last Post: 09-03-2009, 06:44 PM
By Roger H in forum 4-Tec PerformanceReplies: 6Last Post: 08-10-2009, 07:43 AM
By kc8lbn in forum Honda How To & FAQsReplies: 1Last Post: 12-24-2007, 12:11 PM