Results 1 to 7 of 7
  1. #1

    Join Date
    Nov 2005
    Location
    North East Mo
    Posts
    306
    +1
    1

    Need advice on removeing a flywheel

    I am trying to get a flywheel off on my GPR I think the key is half sheered and it is tight
    any tips or advice on how to free it?


  2. #2
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    I just removed one..it was a bitch...very tight...I used a steering wheel/harmonic ballencer puller and three bolts from your stinger housing at the d-plate/cat conv...tighten puller real good add a little heat from a propane torch and tap the end of puller w/ brass hammer,tighten it some more and POP it will scare you and come off....thats how i did it.

  3. #3
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450

  4. #4

    Join Date
    Apr 2006
    Location
    South MS
    Posts
    1,095
    I almost gave up on mine, but then I managed to get an impact on the puller and with one pull on the trigger it popped off.

  5. #5
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    It usually takes some patience
    I find positioning the bolts to pull evenly is the key you can tap on the puller as well.(use common sense.)
    I have not had to use heat yet but I had one once that I left the puller on and heard it pop while I was laying in bed.
    PTO couplers I have broke 2 removing them.
    SCOTT.................

  6. #6

    Join Date
    Nov 2005
    Location
    North East Mo
    Posts
    306
    +1
    1
    Thanks guy
    I will try heating it see if that will do the trick, I had taped on the end of the puller a little was scared to get very rough glad for the help.

  7. #7

    Join Date
    Nov 2005
    Location
    North East Mo
    Posts
    306
    +1
    1
    warmed her up and tapped it and it jump right off the crank. Key good flywheel cracked and turning half a turn in its self.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 04 RXP Sensor light Code P1517 Need Help/Advice on Removal Please Read
    By davidrxp in forum Sea Doo Open Discussion
    Replies: 16
    Last Post: 12-03-2013, 08:22 PM
  2. Need Advice on '06 RXP Purchase
    By Flynfox in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 09-24-2006, 10:06 PM
  3. New to Green Hulk. Needs advice on 98 Seadoo GTX Limited
    By pump123$ in forum 2-Stroke Performance
    Replies: 8
    Last Post: 08-30-2006, 09:23 AM
  4. Need advice on building an 80 mph ski in Florida...
    By rxpvic in forum 4-Tec Performance
    Replies: 10
    Last Post: 06-17-2006, 09:03 AM
  5. Need advice on selling my ski overseas?
    By Shibby1485 in forum Sea Doo Open Discussion
    Replies: 26
    Last Post: 11-27-2005, 09:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •