Thread: Just checked super charger slip
08-08-2006, 04:45 PM #1
Just checked super charger slip
just checked SC slip found to be 2.5 ft.pounds can any one convert to NM or other please.
08-08-2006, 05:05 PM #2
1 foot pounds force = 1.35581795 newton meters
08-08-2006, 05:08 PM #3
2.5 ft.lbs = 30.0 in lbs=3.39 nm which is WAY low! should be around 90in lbs with metal clutch washers
08-08-2006, 05:15 PM #4
thanks people need to get it looked at. still on the ceramics 04 with 70 hrs on it thanks again
08-08-2006, 05:50 PM #5
- Join Date
- Apr 2005
- Elysian Fields,Tx
Would be a good time to get rid of the ceramics and upgrade to the metal washers.
08-09-2006, 07:56 AM #6
08-09-2006, 09:14 AM #7Originally Posted by Top banana
You can change them yourself it's not hard. Just need a torque wrench, which I bet you could rent or something.
08-09-2006, 12:27 PM #8
did anyone lose top rpms when the setting was low if so how much.
08-09-2006, 12:43 PM #9Originally Posted by Top banana
A long time ago, my stock '04 clutch registered 5.3 nm and I was only running 7750-7800 rpm. So 200-300+ rpm loss. 50 hrs on that clutch.
Last edited by BDNJ; 08-09-2006 at 12:45 PM.
08-09-2006, 12:48 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Mtuned in forum Sea Doo ClassifiedsReplies: 7Last Post: 11-03-2011, 12:29 PM
By benarm in forum 4-Tec PerformanceReplies: 3Last Post: 04-03-2011, 06:11 PM
By stl2slw in forum 4-Tec PerformanceReplies: 10Last Post: 08-29-2009, 02:48 PM
By CHANDY in forum 4-Tec PerformanceReplies: 8Last Post: 06-19-2009, 08:17 AM
By wavehummer in forum 4-Tec PerformanceReplies: 7Last Post: 09-17-2008, 03:56 PM