Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24

Thread: 65mph xlt

  1. #1

    65mph xlt

    first time with a gps and it ran 65mph. 85deg and 75% humidity turned a out of the box 13/19 to like 7215 warmed up. 2 shims in the front of the plate and 1 in rear. F/A's protec rec head vf3s r&d dplate free flow jims modded riva ride plate rive intake grate 3 deg keyway...i didnt mess with the shims at all etc etc and the whole package underneath could use some fine tuning..


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536

  3. #3
    haha Ok. wasnt sure how good it was.. ill be calling you. i bought leos 1390 and he says its the same combo as is in your wife's.. Id like to add 10mph to this like yourself

  4. #4
    If your not doing something, its hard to screw up. stlouisramsfan's Avatar
    Join Date
    Jul 2007
    Location
    Pontoon Beach Illinois
    Posts
    1,115
    congrats

  5. #5
    between 1/2 and 3/4 gas too

  6. #6
    o uncola o's Avatar
    Join Date
    Aug 2008
    Location
    Pittsburgh, PA
    Posts
    1,060
    sounds like good numbers to me.

  7. #7
    zx11rider's Avatar
    Join Date
    Jun 2009
    Location
    Cape Coral
    Posts
    1,132
    NICE........ That is a great # with that small prop I am turning a 14/23 concord in mine. I like hearing about other XLTs modded, Jim Built mine and my best run is 71.2 @ 7100 rpms but it is only a 1300 that 1390 will be faster (My topend is from Leo as well) are you running stock carbs and the old pump I am getting ready to put the ho pump and a dynafly in mine, most people get another 1 or 2 mph with the 05 ho pump. Ron
    Last edited by zx11rider; 08-17-2009 at 10:46 PM.

  8. #8
    Yeah stock carbs. As soon as carl ships it ill have an ho as well

  9. #9
    zx11rider's Avatar
    Join Date
    Jun 2009
    Location
    Cape Coral
    Posts
    1,132
    Quote Originally Posted by LETHAL RX7 View Post
    Yeah stock carbs. As soon as carl ships it ill have an ho as well
    What did you have him pitch the prop to you will spin that 14/20 too high.

  10. #10
    Just went with the stock 14/20. Said i should start there to get a baseline.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HELP!! How to turn on Yamaha 1200 xlt on...?
    By GeoRXT in forum Yamaha PWC Performance (2-stroke)
    Replies: 21
    Last Post: 12-17-2009, 09:56 PM
  2. 2005 xlt 1200 question
    By leojr04 in forum Yamaha PWC Performance (2-stroke)
    Replies: 13
    Last Post: 04-28-2006, 10:52 PM
  3. XLT 1200 CAVITATION
    By 97GPSLEEPER in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 04-28-2006, 08:51 AM
  4. How to start Yamaha 1200 XLT
    By GeoRXT in forum Yamaha Open Discussion
    Replies: 17
    Last Post: 04-24-2006, 01:56 PM
  5. Yamaha 1200 XLT pain in the...
    By GeoRXT in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 04-22-2006, 09:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •