Thread: SLT 780 standard bore tolerance.
08-13-2009, 11:39 AM #1
- Join Date
- Jun 2008
SLT 780 standard bore tolerance.
My cylinder is stock 2.807 size and was going to have it honed but the guy guy said to bore it. I see the taper and out of round tolerance is .002. What is the most I can take out of the cylinder and still be able to use a stock size piston? I am assuming the wear tolerance is also .002. Is this correct? Thanks Mike
08-13-2009, 01:44 PM #2
Normal piston clearance for the 780 is .003 to .005 with a max limit of .008.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By bgaidan in forum Polaris ClassifiedsReplies: 1Last Post: 07-14-2012, 09:25 PM
By Capnducttape in forum Polaris Open DiscussionReplies: 2Last Post: 07-27-2010, 12:56 PM
By BBCaprice in forum Polaris Open DiscussionReplies: 13Last Post: 05-14-2007, 10:25 AM
By tcboss429 in forum Polaris Open DiscussionReplies: 10Last Post: 05-07-2007, 03:36 PM
By Mikoo in forum Polaris How To & FAQsReplies: 29Last Post: 03-08-2007, 10:38 AM