08-14-2009, 01:37 PM #1
- Join Date
- Aug 2009
96 SLTX 1050 Tuning/Jetworks flow valve
I am having problems tuning carbs on this ski.Machine is box stock. I run at 6500' altitude and have jetted down to recommendation from service manual.
I am thinking about installing a Jetworks flow control valve in the exhaust. has anyone done this and where does the valve go in the system.
Symptom are, boggy when accellerating, like its loaded up, after changing main jets down for altitude and installing carb kits, now it wont idle for longer than a few seconds with out dieing, must choke to start up. Pop-off is around 20 on all three carbs.
Any help would be appreciated.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By x2ryder in forum Kawasaki ClassifiedsReplies: 0Last Post: 01-17-2011, 02:18 PM
By skigolfnut in forum Polaris Open DiscussionReplies: 19Last Post: 04-08-2010, 10:29 PM
By gordon lasiter #328 in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 10-16-2008, 02:39 PM
By born riding in forum Kawasaki PWC Performance (4-stroke)Replies: 2Last Post: 07-20-2008, 01:39 PM
By ZMANN in forum Polaris PWC PerformanceReplies: 19Last Post: 01-10-2007, 12:32 PM