Results 1 to 5 of 5

Thread: 2nd Cylinder

  1. #1

    2nd Cylinder

    anyone have a problem with the reeds geeting tore up in the 2nd cylinder


  2. #2
    r33pwrd's Avatar
    Join Date
    Mar 2006
    Location
    Sammamish Washington
    Posts
    4,216
    +1
    360
    Quote Originally Posted by GTNWRECT
    anyone have a problem with the reeds geeting tore up in the 2nd cylinder

    I know of one but i think it was just bad luck! where they stock reeds? if so I have a set of stockers from an 05 with 20 hours on them.

  3. #3

    reeds

    ya they are stock problem is i replaced that set already rode for a few hours went to fire it up to flush made the same ticking sound again broke the same reed again trying to figure out why ??? should i try a new cage or look at the thrust washers on the crank to see if they are going bad
    Last edited by GTNWRECT; 08-10-2006 at 03:10 PM.

  4. #4
    Moderator Insanediego Joe's Avatar
    Join Date
    Mar 2006
    Location
    San Diego, California, United States
    Posts
    5,885
    +1
    142
    I have a hardly used set of oem reeds and cages with 3/8s" spacer plate. comes with gaskets. You need to space those reeds out from the turbulance of the case.

  5. #5

    ok

    how much do you want for them and will it work for an 03xlt1200
    Last edited by GTNWRECT; 08-11-2006 at 06:58 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2nd XP-4tec built
    By mrracing in forum Conversion PWC Performance Skis
    Replies: 33
    Last Post: 09-25-2014, 09:35 PM
  2. rxp cylinder compression
    By buddydoo in forum 4-Tec Performance
    Replies: 16
    Last Post: 05-31-2006, 05:22 PM
  3. lost compression on all cylinders
    By mxl16 in forum 4-Tec Performance
    Replies: 36
    Last Post: 12-03-2005, 05:15 PM
  4. 2nd blown SC..bov
    By mxl16 in forum 4-Tec Performance
    Replies: 7
    Last Post: 08-31-2005, 06:34 PM
  5. Dropping cylinder?
    By Prez in forum 4-Tec Performance
    Replies: 9
    Last Post: 08-04-2005, 09:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •