Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2008
    Fond du lac Wisconsin

    2001 gp1200r needs some work

    Good condition hull. Has low hours on the motor. Needs crank rebuild and cylinder two replated and new piston. Cylinder head is reusable. Tested other two cylinders before taking apart and they test 120 and 119. So they both tested good and look good upon further inspection. Comes with shorelander trailer. It is all taken apart right now. Looking for $2200obo. Last time it ran it blew a crank bearing and the 2nd cylinder. Up to that point it was running 65 stock with gps. Hull has jet pump and intermediate shaft. Has all the electronics. It also has an electric bilge pump and a Tiny Tach to measure the rpms accurately. It has the jetworks mod done and a stainless steel block off plate. Also has waveeatter clips, rejetted carbs with t handles, and prok flame aresters. Also has been converted to premix and has a primer installed. Also has a bored out sho nozel. Thats all I can think of right now for mods. I will also include about 200 dollars of west system fiberglass supplies and a half pint of oem paint that matches the blue. Any questions feel free to ask. Located in Wisconsin
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P7270025.JPG 
Views:	37 
Size:	11.5 KB 
ID:	146254   Click image for larger version. 

Name:	P7270026.JPG 
Views:	30 
Size:	10.0 KB 
ID:	146255   Click image for larger version. 

Name:	P7270029.JPG 
Views:	35 
Size:	14.2 KB 
ID:	146256  

  2. #2
    still available?and if so where is the ski located?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts 2001 GP1200R - Need some items
    By showmepro1200 in forum Yamaha Classifieds
    Replies: 16
    Last Post: 02-10-2013, 09:08 PM
  2. FS - Parts 97-99 Gp1200 stock heads ( need some work )
    By CDW78 in forum Yamaha Classifieds
    Replies: 0
    Last Post: 03-01-2012, 02:07 PM
  3. FS 09 FZR Hull that needs some work
    By L Carlson in forum Yamaha Classifieds
    Replies: 4
    Last Post: 10-14-2010, 12:34 PM
  4. 2001 GP1200R Need some help
    By dustin1145 in forum Yamaha How To & FAQs
    Replies: 7
    Last Post: 07-04-2010, 07:45 AM
  5. Need some help gp1200r
    By raptoramine in forum Yamaha How To & FAQs
    Replies: 1
    Last Post: 04-14-2008, 09:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts