Quote Originally Posted by RXP244 View Post
I have just redone my SC. It had seadoo cup washers and two shims and was holding at 13ftlbs. Ended up only putting two McMaster washers in, no shims and having to take heaps off the thrust spacer to get it set at 18ftlbs. They are much thicker than the standard washers. Now I just hope they help with holding the tension. I didn't change the clutch washers.
The ones in my 08 kit are the same thickness. i ended up removing two shims as well and replacing with just two mcmaster washers and shaving a little off the nut side spacer to get 16lbs