Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1
    portland's Avatar
    Join Date
    Aug 2009
    Location
    QBC in UAE
    Posts
    59

    your help in preformance parts

    Hello to every one,

    i would like to upgrade my engine parts .but i am confusing between these company s which is R&D, Rius and Macc.

    1. Piston Kits

    2. connecting rods kit

    3. Head stud kit

    4. titanium valve kit

    5. crankshft

    here are the links

    http://www.rd-performance.com/newPro...yamaha/sho.asp

    http://www.rius-racing.com/mm5/merch...Code=RR-CU-YAM

    http://www.maccracing.com/mm5/mercha...Code=MR-YH-FZR

    i would like to know which one is good and what i have to
    upgrade.

    that will help me a lot not just me.

    thank you guyz.


    FX SHO 09 Riva Grate and pump seal kit, MoTec ECU,riva Intake Manifold Upgrade, Riva Air Intake, type 19 Intercooler Cooling Kit, Styrofoam inserts removed, R&D Ride plate, e1 impaler 16 psi. 13/24 prop .Small Blond Girl clean the engine Pistons. [email protected]


  2. #2
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    I would start smaller. Get the basics first.

  3. #3
    portland's Avatar
    Join Date
    Aug 2009
    Location
    QBC in UAE
    Posts
    59
    Riva Grate and pump seal kit, MoTec ECU,riva Intake Manifold Upgrade, Riva Air Intake, type 19 Intercooler Cooling Kit, Styrofoam inserts removed, R&D Ride plate, e1 impaler 16 psi . what is more i dont remember . anyway this is what i have in my ski.
    Last edited by portland; 08-27-2009 at 07:34 PM. Reason: add 19

  4. #4
    portland's Avatar
    Join Date
    Aug 2009
    Location
    QBC in UAE
    Posts
    59
    how your remove the Ride plate spacers?

  5. #5
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11
    Quote Originally Posted by portland View Post
    how your remove the Ride plate spacers?
    Assuming you are asking about an FZ-series based ski.

    Remove the four phillips screws that locate the speedo from the ride plate.

    Remove the four 12 mm screws that hold the ride plate to the ski.

    My spacers had some sort of pressure sensitive two-sided tape that held them onto the ride plate. I simply took a flat head screwdriver and pried on one side until the tape let go.

    It's simpler than it seems.

  6. #6
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    My bad. You have a lot done to your ski. What kind of numbers are you getting? How is the type 19 working for you?

  7. #7
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    Any prop upgrade?

  8. #8
    portland's Avatar
    Join Date
    Aug 2009
    Location
    QBC in UAE
    Posts
    59
    13/24

  9. #9
    wow I didnt know that ruis had been so busy....they have alot of goodies now...

  10. #10
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    You need the R&D Engine/Intercooler Cooling system for sure. That would help to lower engine temp significantly. It lowered mine 30-40 degrees. Well worth the money but a bitch to install.....or so I've heard. R Rated did mine for me.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need help in finding a polaris part
    By podog in forum Polaris Open Discussion
    Replies: 5
    Last Post: 02-02-2009, 10:26 PM
  2. help to find part in OEM store
    By camar0 in forum 4-Tec Performance
    Replies: 2
    Last Post: 09-15-2008, 03:02 PM
  3. Replies: 0
    Last Post: 09-08-2008, 11:34 PM
  4. need some help in getting parts please!!!!!!!
    By MysssticGhost in forum 2-Stroke Performance
    Replies: 12
    Last Post: 07-16-2008, 07:58 AM
  5. Forum Member In Need Of Your Help!!!
    By gtxscrider in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-13-2007, 08:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •