08-29-2009, 08:43 AM #1
Any results on the Mini Rude Upgrade for X chargers available?
Does anyone have some test results on the Mini Rude Upgrade for X chargers .
I 'm thinking installing one on my T-x.
Have to upgrade to 50 lbs injectors,otherwise you will run lean.
Any speed gains or boost numbers would be nice !!
So lets show some results guys.!!!
08-29-2009, 08:48 AM #2
the 2 running them here are seeing about 14 lbs on a stock ecu @ 8000-8150 both are on RXTs, 1 X and 1 reg both are running mid 75s
08-29-2009, 09:32 AM #3
Thanks,are they running the 50's injecters or a rrfpr?
08-29-2009, 02:17 PM #4
08-29-2009, 02:50 PM #5
08-29-2009, 03:11 PM #6
They are bad ass. Equal if not better than a 2 Rude from what I saw today. IMO..
Last edited by dduck1628; 08-29-2009 at 03:11 PM. Reason: mispelled saw,,duh..
08-29-2009, 03:15 PM #7
They guys Jeff is talking about are running 48s on one and 50s on the other.
08-29-2009, 03:44 PM #8
Okay Guy's, My last time in the water. I saw major improvements. I'm running a 2006 RXT with a Mini Rude 14.0 of boost, @ 8140-60, 75mph solid not just one run(three sets of testing) this was with 42lbs injectors and a 15/22+ 2mm, Rad4 Torque Plate, Jim's Rideplate mods. I know that my ski is running lean with these injectors. I wanted to do more testing, But Riva got me on hold to keep testing. I install JD1 open loop system, 50lbs injectors, Begi Regulator. BUT NO PLATE TO GO A HAVE SOME TESTING DONE AND HAVE FUN. RIVA IS KILLING ME! IF THEY SEND OUT THE PLATES NEXT WEEK, I WOULD BE UP AND RUNNING TO SETUP MY AFR AND REPORT BACK TO YOU GUY'S.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Lbaronio in forum 4-Tec PerformanceReplies: 5Last Post: 07-16-2010, 07:29 PM
By Lbaronio in forum 4-Tec PerformanceReplies: 4Last Post: 07-11-2010, 02:30 PM
By pet in forum Sea Doo ClassifiedsReplies: 0Last Post: 11-14-2009, 11:16 PM
By Brera Hifi in forum 4-Tec PerformanceReplies: 2Last Post: 10-08-2009, 06:35 AM
By eissa in forum 4-Tec PerformanceReplies: 2Last Post: 08-07-2009, 08:48 AM