Jet ski was running fine but I believe I got mud in the cooling system. The Jet ski went into limp mode and then quit running. Iíve checked compression, fuel and spark plugs firing.

The ski wants to start really bad but just wonít start. Iíve sent the computer to DFI technology and was told nothing is wrong with the computer. Iíve pulled the engine to check for restrictions in the exhaust and found nothing. Iíve checked for a broken piston skirt and also a sheared flywheel key and again found nothing

Took the ski to the local dealer and advised the computer shows a hard code for the crank position sensor. Replaced the crank sensor and still won't start. My next part to replace will be the stator. Does anyone rebuild stators. Also any suggestions to fix my deal ski.