Results 1 to 10 of 10

Thread: LIL HELP?

  1. #1

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4

    LIL HELP?

    So i was out today ski ran for 2 hours while friends used it.. anyways when i took it out after a while the alarm went off and the little exhaust symbol and the engine symbol flashed back and forth.. it also would surge from 7K RPM to 6K RPM every few seconds.. while on the throttle. you could feel the speed lose.. i was messing with the EFI controler earlier to try n get it tuned better cause it was to rich before..
    This was the 3rd time it has been out since my parts have been put on.. I.E. free flow, new prop, F/A, EFI control, D-plate. and other parts but are not important.. when i first took the ski out when these parts got put on the little chip for the sensor was setting off the alarm so i return the sensor and left the chip out and it ran great..

    ANY HELP??? 2008 GPR 1300R hit 50 hours today


  2. #2

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4
    42 views and no one can help hu...

  3. #3
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    you need a resistor where the chip went. I think 1.2 k ohms, but not sure so do a search.

  4. #4
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Plug your oem cat temp sensor back in and see. Ive been running my eom sensor since 06' ...on my 06'

  5. #5
    Mike xsockguyx's Avatar
    Join Date
    Sep 2007
    Location
    NJ
    Posts
    1,744
    +1
    2
    2.2k Resistor you can wire into the exhaust temp sensor and you'll never hear that alarm again. You can get the resistor at Radio shack for .99c

  6. #6

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4
    i have the OEM sensor plugged in.. it ran for for a few days like that.. now all of the sudden its going off

  7. #7

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4
    Quote Originally Posted by xsockguyx View Post
    2.2k Resistor you can wire into the exhaust temp sensor and you'll never hear that alarm again. You can get the resistor at Radio shack for .99c

    how do you use it? do you wire it from black wire to white wire to complete the circuit?? whats the diff between that little resistor and the RIVA clip?

  8. #8
    Mike xsockguyx's Avatar
    Join Date
    Sep 2007
    Location
    NJ
    Posts
    1,744
    +1
    2
    Quote Originally Posted by flkeyzgp1300r View Post
    how do you use it? do you wire it from black wire to white wire to complete the circuit?? whats the diff between that little resistor and the RIVA clip?
    On the newer ski's 2005-2008 that chip was well known for not working. So myself and alot of other people are using the 2.2k resistor. You can cut the sensor wiring and tie in the resistor. you can't solder because the wiring is aluminum and wont work. And then wrap some electrical shrink wrap and electrical tape and it should never go off again.

  9. #9

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4
    got a close up of it on urs?

  10. #10

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gp1200 'popping' maybe misfire? Lil help!
    By moo_r32 in forum Yamaha Old School Skis
    Replies: 26
    Last Post: 12-23-2011, 08:03 PM
  2. Any Tig Welders out there...? Need a Lil Help.......
    By Aquaholic6801 in forum Open Discussion
    Replies: 2
    Last Post: 05-02-2011, 12:14 AM
  3. Lil help for an 06 NA GTX?
    By Cuisi in forum 4-Tec Performance
    Replies: 15
    Last Post: 05-03-2009, 07:53 PM
  4. 96 GSX no Start!!! Lil Help
    By GSXRYDER in forum 2-Stroke Performance
    Replies: 15
    Last Post: 11-03-2008, 08:19 AM
  5. need a lil help with Fercho's jetworks mod
    By MJE in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 05-25-2007, 09:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •