Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: My numbers

  1. #1
    GRNGOBLIN's Avatar
    Join Date
    Feb 2006
    Location
    LAKE OF THE OZARKS, MO
    Posts
    166

    Talking My numbers

    Well this is the fastest I have ever gone -73.0 MPH- with a full Riva Stage II installed, left the impeller cone off, and relocated the intake to the front under the small hood. It was 76 degrees air temps and water temp was 87. I wasnt able to turn more than 7950 on the RPMs though so I think there is room for improvement. maybe a lil green hulk impeller treatment.


  2. #2
    Moderator Franko's Avatar
    Join Date
    Apr 2005
    Location
    Dallas, Texas
    Posts
    3,829
    +1
    2
    A little less pitch on your prop and you will see 75 in those conditions.

  3. #3
    GRNGOBLIN's Avatar
    Join Date
    Feb 2006
    Location
    LAKE OF THE OZARKS, MO
    Posts
    166
    Thats sounds sweet Franko, but im afraid of bendin on it, is it really easy to tweak on the prop or could I "F" it up if I dont know what im doin?

  4. #4
    GRNGOBLIN's Avatar
    Join Date
    Feb 2006
    Location
    LAKE OF THE OZARKS, MO
    Posts
    166
    I'm wantin some of those skegs too. How are they lookin for being in stock Jerry?

  5. #5
    Moderator Franko's Avatar
    Join Date
    Apr 2005
    Location
    Dallas, Texas
    Posts
    3,829
    +1
    2
    If you've never done it before, I would send it to Jerry to bend. It's not difficult, but it takes practice.

  6. #6
    GRNGOBLIN's Avatar
    Join Date
    Feb 2006
    Location
    LAKE OF THE OZARKS, MO
    Posts
    166
    Thanks again Franko, that is what I was thinking, Jerry how much do ya charge for a lil tweakin? or do ya have time to do it?

  7. #7
    Moderator two2curupt's Avatar
    Join Date
    May 2005
    Location
    Toronto, Canada
    Posts
    2,991
    +1
    41
    Quote Originally Posted by Franko
    If you've never done it before, I would send it to Jerry to bend. It's not difficult, but it takes practice.
    That is what I would do if I were you....Better off sending it out to Jerry...It is not hard "but" if you screw it up your screwed

  8. #8
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by GRNGOBLIN
    I'm wantin some of those skegs too. How are they lookin for being in stock Jerry?
    They are in stock and ready to ship.

  9. #9
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by GRNGOBLIN
    Thanks again Franko, that is what I was thinking, Jerry how much do ya charge for a lil tweakin? or do ya have time to do it?
    $50 and that includes return shipping

    Life Saving Equipment
    att: Jerry Gaddis
    105 Roderick Street
    Morgan City, LA 70380

  10. #10
    GRNGOBLIN's Avatar
    Join Date
    Feb 2006
    Location
    LAKE OF THE OZARKS, MO
    Posts
    166
    Alright I will get it off to ya as soon as I can....What kind of turn around should I expect before ya could do it I know ya get busy there?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How are my numbers?
    By 83Gator in forum 4-Tec Performance
    Replies: 19
    Last Post: 06-21-2011, 06:04 AM
  2. I keep destroying my number one cylinder.
    By shwaller in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 08-23-2010, 10:17 AM
  3. Got my Reg numbers in and on
    By Pettee in forum Yamaha Open Discussion
    Replies: 4
    Last Post: 02-02-2007, 11:09 PM
  4. New numbers on my wife's XLT1200
    By Chezzy in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 05-07-2006, 09:38 PM
  5. New Numbers with my 03 EFI
    By GPGA in forum Yamaha PWC Performance (2-stroke)
    Replies: 46
    Last Post: 02-01-2006, 08:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •