Thread: F.s. Polaris hulls
09-02-2009, 08:10 AM #1
F.s. Polaris hulls
i have many nice, bare hulls here, incase anyone wants to do an upgrade, or switch out over the winter / off season. here are some i think would be of interest.
99 genesis = 2 of them
and many SL's, 650, 750, SLT's, 750, 780, and one 98 SLTX 1050
hive paperwork / registration ( title) avail on any.
100.00 for any bare hull. must pick up in southern WI.
09-02-2009, 10:48 AM #2
- Join Date
- Aug 2009
hey, i was reffered to you by several guys on here, just picked up a '95 sl750 about two months ago, just finished a ring job, and looking to get some performance parts for it. Just wondering if you have any "extended pump" and ride plate from a slx780, and all the "parts" i would need to install it with.
09-03-2009, 09:22 AM #3
hello sam. thank you for the reply, and questions.
yes, i do have everything needed here for an extend pump conversion. send me an email, or call the shop, if i can help.
i also have, one early 92 650 "short dry pipe" left, new ocean pro flame arrestors, or a 780 flame arrestor, that can be modded to be like an open F/A, new primer kits, and lots of other good used stod OE parts.
09-07-2009, 02:59 PM #4
was wondering if you have anything in the way of a 95 slt 750 hull that you could cut the pump section out of ..?
i would probably be interested in the pump to.
09-07-2009, 03:21 PM #5
- Join Date
- Jul 2007
- near Toronto, Canada
09-08-2009, 08:13 AM #6
i have SL's, SLT's etc, i could cut a pump tunnel out of, and send to you. i also have pumps if needed, all parts, pump mount, extension ( if wanted), stator with shaft, bearings, seals, exit nozzles, with or without reverse, some assorted props, cables, etc.
shipping to you in canada will be pricey though.
call the shop if you are really interested. weekday mornings are the best time to catch me at my desk. i cannot call back internationallly, so "if" i do miss you, please keep trying.
09-08-2009, 04:01 PM #7
(Thanx K447,its nice to be back.)
Mr Zigler i am putting a sl750 motor with the op head and 44's ect, into a small 10 and a half ft jetboat,which currently has a miniberkley pump(very small).
I would like to put in a more suitable pump so i need the tunnel section from 94 to 96 slt hull and if possible, the motor mount section like in the pic which is from a 93 hull.
The pump section from a 99 to 04 Genises might also work if you have one damaged but then i wouldnt want the motor mount sec.
I would be looking for the best pump possible, but might hold off for a bit on that hardware depending on the cost for the tunnel section and shipping ect.
i will be giving you a call in the next week or so.
09-08-2009, 06:38 PM #8
Dean, whatsamatter with the 93 hull section you have? A 94+ pump will fit it.
09-08-2009, 06:40 PM #9
- Join Date
- Oct 2006
- Cleveland OH
I wish I was closer to John.
After Sundays fiasco, I really want an SLT hull for "her ride"
09-08-2009, 10:41 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Mr. Matrix in forum Polaris Open DiscussionReplies: 4Last Post: 01-31-2011, 05:46 PM
By jetskitokey in forum Polaris Open DiscussionReplies: 1Last Post: 09-18-2010, 11:43 PM
By rhino81 in forum Polaris Open DiscussionReplies: 11Last Post: 07-01-2010, 03:51 PM
By Cliffy in forum Polaris Open DiscussionReplies: 9Last Post: 01-03-2010, 09:41 AM
By polaris_man in forum Conversion PWC Performance SkisReplies: 3Last Post: 05-04-2008, 08:16 PM