09-09-2009, 02:22 AM #1
hi this might be a dumb question but how do i get the warning stickers that are in french anyway off my ski they are very thin and like foil a bit,i have tried tee tree oil which does weaken the glue but the sticker just tears,any help appreciated
09-09-2009, 05:40 AM #2
You need to get a heat gun and carefully heat the sticker. Once it's heated enough it will peel right off leaving only some glue residue behind. Then use a product like goo gone to remove the glue residue. A propane torch will also work if you keep the flame low and not too close to the sticker. You have to be very careful to move it around and not heat up the area too much to damage the paint.
09-09-2009, 05:14 PM #3
Use Goo-gone straight up, or any label and sticker remover with a razor. You should be fine.
09-09-2009, 07:05 PM #4
If you have a black hull do not use a razor blade. Go with the heat gn and goo gone.
09-09-2009, 10:21 PM #5
acetone works for me, along with elbow grease
but dont get it close to the plastics!
09-10-2009, 07:14 PM #6
09-10-2009, 10:27 PM #7
09-11-2009, 03:33 AM #8
thanks for the help didnt like the idea of razor blade on my lovley white hull so went and got myself heat gun today and the sticker was gone in about 10 min
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By boataddict in forum Sea Doo Open DiscussionReplies: 55Last Post: 08-08-2006, 04:31 PM
By ADAMBOMB in forum Sea Doo Open DiscussionReplies: 12Last Post: 04-11-2006, 10:01 PM
By theantiRXP in forum Sea Doo Open DiscussionReplies: 14Last Post: 12-22-2005, 02:46 PM
By buddydoo in forum 4-Tec PerformanceReplies: 1Last Post: 11-16-2005, 11:15 PM
By MikeTrin in forum Sea Doo Open DiscussionReplies: 9Last Post: 05-06-2005, 03:04 PM