Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
  1. #1

    Join Date
    Jun 2006
    Location
    tx
    Posts
    530

    Lets count how many RXT X tunnel cracked out there

    I just find out my tunnel has many hair line crack. look like this picture. Hope we can come up more number of people have the same issue, BRP will need to recall this matter.
    Attached Images Attached Images  


  2. #2
    2006 Turbo RXP boBO's Avatar
    Join Date
    Mar 2008
    Location
    STATE OF KUWAIT
    Posts
    1,034
    Second in line

    BTW I throw my hull in the garbage and buy used RXP hull and put my junk in it

  3. #3
    Poppa Dawg's Avatar
    Join Date
    Dec 2005
    Location
    Alice. Texas
    Posts
    1,015
    +1
    49
    3

  4. #4
    sweetbats's Avatar
    Join Date
    Mar 2008
    Location
    Glen Allen, VA
    Posts
    238
    Mine did. My dealer took care of me and it is now fixed.

    Kingsland Reach Marina in Richmond, VA. Kevin Seeber is the GM. I highly recommend them to anyone in the NC, VA, DC and MD areas.

  5. #5
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,849
    +1
    742
    Another. This was done in a previous thread early spring. There are over 25 members with this problem, very few fixed by dealer or seadoo!

  6. #6
    richrxp's Avatar
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    949
    +1
    1
    Quote Originally Posted by XRIDER View Post
    I just find out my tunnel has many hair line crack. look like this picture. Hope we can come up more number of people have the same issue, BRP will need to recall this matter.
    After every ride i inspect my pumptunnel.
    No issues so far,63 hours on it,but i'm wachting carefully.

    The yamaha's seem to have the same trouble.

    Let's wait and see if it's better on the 2010 models,a new hull say's nothing ,if the pumptunnel is'nt strong enough .

  7. #7

    Join Date
    Jun 2006
    Location
    tx
    Posts
    530
    I could not see clear with the intake grate on , after I take off the intake grate and use high beam flash light, I start see visible hair line crack.


    Quote Originally Posted by richrxp View Post
    After every ride i inspect my pumptunnel.
    No issues so far,63 hours on it,but i'm wachting carefully.

    The yamaha's seem to have the same trouble.

    Let's wait and see if it's better on the 2010 models,a new hull say's nothing ,if the pumptunnel is'nt strong enough .

  8. #8
    richrxp's Avatar
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    949
    +1
    1
    Quote Originally Posted by XRIDER View Post
    I could not see clear with the intake grate on , after I take off the intake grate and use high beam flash light, I start see visible hair line crack.
    Is your ski stock?

    Mostly the cracks are on moded ski's,however stock rxt-x have been reported with the cracks.

    I would think things over ,before hitting the water.

    Maybe a bilgepump ,if you wanna ride with the cracks,but it's a risk.

  9. #9

    Join Date
    Jun 2006
    Location
    tx
    Posts
    530
    R&d intake, 4" air, repitched stock impeller, ride plate fill, removed screen, 11 hours, 71mph


    Quote Originally Posted by richrxp View Post
    Is your ski stock?

    Mostly the cracks are on moded ski's,however stock rxt-x have been reported with the cracks.

    I would think things over ,before hitting the water.

    Maybe a bilgepump ,if you wanna ride with the cracks,but it's a risk.

  10. #10
    richrxp's Avatar
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    949
    +1
    1
    Quote Originally Posted by XRIDER View Post
    R&d intake, 4" air, repitched stock impeller, ride plate fill, removed screen, 11 hours, 71mph
    Almost the same mods as mine except i have a worx grate,and a 15/22r.

    These are stage 1 mods,that's not the cause of the cracks,sadly the hull is not designed verywell,should have been some reinforcements made at the tunnel by seadoo at the factory.

    Lets hope the new hulls are stronger then ours.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2008 RXT-X-tunnel cracks
    By iflyems in forum 4-Tec Performance
    Replies: 9
    Last Post: 12-03-2009, 01:13 PM
  2. Replies: 22
    Last Post: 10-18-2008, 08:13 PM
  3. Replies: 16
    Last Post: 09-27-2008, 02:06 AM
  4. How many rxt-x skis will be available?
    By eze in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 09-07-2007, 10:12 PM
  5. Let's Take Count...How Many People With Delam. Hulls.
    By yellow4 in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-15-2007, 11:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •