Results 1 to 3 of 3
  1. #1

    Join Date
    Nov 2006
    Location
    Delray Beach, Florida
    Posts
    423
    +1
    1

    damaged 2004 215 head

    Just cleaning house as the season is over..

    I have a 2004 215 head that dropped a valve. it is not the worst one I have seen. all of the seats are in tact, although I think you would need to replace 1 or 2. of course it needs a guide or 2, and a little welding. I dont know what it is worth. it has no valves or springs, just a bare head with damage to the pto combustion chamber. It has never been decked or otherwise repaired. I could supply 04 or 08 springs and retainers, and I may have a stock set of valves. I have no photos of it, but can take some on request.

    I am a machinist, and I would repair it myself, just no time.. I left it in the corner for a year now, and still have not touched it I bit the bullet and brought a new one when I had to...

    send me an e-mail if interested.
    [email protected]


  2. #2

    Join Date
    Nov 2006
    Location
    Delray Beach, Florida
    Posts
    423
    +1
    1
    just realized this is in the wrong section sorry..

  3. #3

    Join Date
    Nov 2006
    Location
    Delray Beach, Florida
    Posts
    423
    +1
    1
    photos of the head.

    Not that bad actually, you could clean it up with some air tools, a bit of welding, and have good rec head cheap. The seats did not get hit, and they look intact. To make it a race head, I would send it out for a complete makeover. Never cut, never blew a head gasket.

    Make an offer
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_9152.jpg 
Views:	35 
Size:	531.1 KB 
ID:	151109   Click image for larger version. 

Name:	IMG_9151.jpg 
Views:	43 
Size:	621.7 KB 
ID:	151110   Click image for larger version. 

Name:	IMG_9153.jpg 
Views:	33 
Size:	565.4 KB 
ID:	151111  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2004 GP1300R Head Torque Specs
    By jaywaite in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 11-18-2016, 10:19 AM
  2. 2004 rxp head
    By goingfast92 in forum 4-Tec Performance
    Replies: 2
    Last Post: 04-14-2011, 06:28 PM
  3. WTB damaged 1200/1300 head
    By WATER WOODY in forum Yamaha Classifieds
    Replies: 9
    Last Post: 06-28-2010, 03:10 PM
  4. FS: Damaged 1300 pv head
    By wakewhornc in forum Yamaha Classifieds
    Replies: 0
    Last Post: 09-08-2009, 12:06 PM
  5. FS: 2004 GP1300R head
    By 04GPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 04-17-2009, 01:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •