Thread: sl 750 fuel line question
09-20-2009, 09:48 PM #1
- Join Date
- Sep 2009
sl 750 fuel line question
Well to make a short story long, I'm ready to install the eng. in my ski. The problem is I wasn't the one that removed it. I have figured out where almost all the lines go (bildge, water inlet and outlet and all) but still have some questions on the fuel line routing. Any help would be appreciated.
09-20-2009, 10:08 PM #2
- Join Date
- Oct 2006
- Cleveland OH
09-21-2009, 09:15 AM #3
Hi, TOM here.
This is a quick drawing Iwas making doing my sl and slt. I got the routing from the tech section from beerdart. This is how I have mine routed. Includes the "new" triple fuel pump added as a upgrade that the guys on here recommend. The old pump will eventually will loose the ability to pump and this remedies any lean condition from the pump loosing pump pressure. Hope this helps. You can delete the fuel filter if you like. The water fuel separator filters the water and dirt out of the gas, so it's up to you. Good luck!
P.S. Keep the little restrictor in the return line. Don,t throw it out by mistake. It's right off the return line if its still there. It will have a black tie-wrap around it about 1/2 inch away from the return rail. Right on the hose going to the return. If missing, you must get one, It builds pressure for the carbs.
Welcome to the hulk.!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By joeyjunio in forum Polaris Open DiscussionReplies: 8Last Post: 09-23-2007, 03:26 PM
By howestek in forum Yamaha Open DiscussionReplies: 6Last Post: 09-13-2007, 09:59 PM
By ace16a in forum Polaris Open DiscussionReplies: 3Last Post: 07-08-2007, 11:10 PM
By 785 lugs in forum Polaris Open DiscussionReplies: 9Last Post: 04-08-2007, 11:01 AM
By gorilla03 in forum Polaris How To & FAQsReplies: 28Last Post: 02-17-2007, 12:58 PM