Thread: Fizzle Install ???
09-28-2009, 07:20 PM #1
Fizzle Install ???
Insalling the 4" fizzle, what do I do with the engine breather hose, I dont have a catch can.
Last edited by troyheb; 09-28-2009 at 07:21 PM. Reason: s
09-28-2009, 07:34 PM #2
You can make one, buy a Riva, I can make you one, or you can tap into the intake hose. I plan on having one available in the online store soon.
09-28-2009, 07:37 PM #3
I would seriously consider making or purchasing a C/C...after the first time you drain it and see the crap that comes out of it you will know why.......use the instructions on this forum to make one...easy and cheap....if you really don't want one....then you may be able to put a slit in the side of the Kanaflex and inert it there...However i would not recommend this as i would think that this will compromise the intake
09-28-2009, 07:40 PM #4
You can drill and tap the adapter that goes between the air filter and the kanaflex. Stick a 3/4" barb x whichever size thread you decide fitting in and call it a day. If there's not enough material to thread into you could try to 'glue' it in.
09-28-2009, 08:54 PM #5
09-28-2009, 09:03 PM #6
Is there a good reason to not just have it sitting there in the hull once you remove it from the stock intake?
09-28-2009, 09:18 PM #7
- Join Date
- Aug 2007
- Reading PA
yeah all the crappy oil and fuel mix that is gonna now be sitting in the bottom of ur hull.
09-28-2009, 09:30 PM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Fast-XPL in forum 4-Tec PerformanceReplies: 14Last Post: 05-02-2009, 02:07 PM
By izz0 in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 10-12-2007, 07:11 AM
By beerdart in forum Yamaha Open DiscussionReplies: 9Last Post: 09-09-2007, 09:30 AM
By Flynfox in forum Sea Doo Open DiscussionReplies: 8Last Post: 01-31-2007, 12:50 PM
By TroyRXP15 in forum 4-Tec PerformanceReplies: 4Last Post: 08-14-2005, 08:27 PM