09-28-2009, 09:12 PM #1
rxp-x stock prop switched to stock 15/22r results.
I swapped out my stock prop yesterday and made a few runs. 82 air 82 water. 8100 RPMS 73.5MPH.
My stock prop was turning about 8060-8080 @72Mph.
Although it looks PERTY im thinking I should have just tweaked my stock prop and spent the 300 bucks on something different!
09-28-2009, 09:15 PM #2
- Join Date
- Aug 2007
- Reading PA
from what i have been told u need a nozzle along with that prop on a RXPX
09-28-2009, 09:17 PM #3
Def need the 83 nozzle. Was running 74 consistent over the weekend
09-28-2009, 09:20 PM #4
Ya, Im going to get one of those soon and over the winter let Jerry rebuild my sc. Once he has done this I will see where I am and send off the prop as required.
The freezer wear ring Method is a trip! The wear ring just fell out of the pump!
09-28-2009, 09:22 PM #5
Gained a solid 1.5 MPH, that seems good. What didn't you like about it?
09-28-2009, 09:25 PM #6
I like it and Im glad I got it but I think the stock prop tweaked a bit may produce the same numbers?
It felt a bit better out of the hole but that could have been from flipping the wear ring.
09-28-2009, 09:28 PM #7
If you go with that prop you really need to send it to Duke or Erik to get the most out of it.
09-28-2009, 09:30 PM #8
Im definitely going to send it to one of them but Im going to see where my RPM's fall to after Jerry rebuilds my SC and I install the 83MM nozzle so I can give them the info.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By driveumhard in forum 4-Tec PerformanceReplies: 4Last Post: 10-25-2007, 11:06 PM
By NoMo-xp4me in forum 4-Tec PerformanceReplies: 15Last Post: 10-01-2007, 03:12 PM
By engineermike in forum 4-Tec PerformanceReplies: 5Last Post: 09-10-2006, 09:55 PM
By RXPBullet in forum Sea Doo Open DiscussionReplies: 2Last Post: 05-10-2006, 10:37 PM
By RXPSC05 in forum 4-Tec PerformanceReplies: 17Last Post: 09-11-2005, 05:08 PM