Results 1 to 2 of 2
  1. #1

    Unhappy How far can the Cylinder base be shaved?

    This Rx135 2 stroker Piston I am currently dealing with is approximately 0.151" or 3.79mm below Cylinder deck height, since Cylinder base gasket is not an option here to increase the piston height, the next option that comes to mind would be to shave/mill the cylinder base to achieve optimal piston to cylinder deck height/clearance.

    Possible?


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    Quote Originally Posted by Scoobee View Post
    This Rx135 2 stroker Piston I am currently dealing with is approximately 0.151" or 3.79mm below Cylinder deck height, since Cylinder base gasket is not an option here to increase the piston height, the next option that comes to mind would be to shave/mill the cylinder base to achieve optimal piston to cylinder deck height/clearance.

    Possible?
    pm LHorning

    or visit http://www.2-stroke-porting.com/index.html

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How much can the block be decked?
    By spinyard in forum 4-Tec Performance
    Replies: 1
    Last Post: 08-06-2012, 01:37 PM
  2. Replies: 7
    Last Post: 07-20-2011, 07:47 AM
  3. Overbore - how far can u go on the stock sleeves?
    By boostaholic in forum 4-Tec Performance
    Replies: 10
    Last Post: 02-23-2009, 02:37 PM
  4. Polaris SLT 750 How far can I bore out the jugs??
    By jarcynvicnchris93 in forum Polaris Open Discussion
    Replies: 3
    Last Post: 06-18-2008, 12:28 PM
  5. Can the RXP engine be used on land
    By SEADOORXP in forum 4-Tec Performance
    Replies: 6
    Last Post: 03-07-2006, 04:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •