Results 1 to 7 of 7
  1. #1

    Impellor Removal

    Now I have done this before but it has been a while. I need to turn this thing clockwise right to get it off the pump correct? I have a skat pump. The thing is not budging and I really do not want to bend my drive shaft.

    This is a GPR.

    UPDATE: Spoke with Woody. He says i am right I just need to be a little more persuasive. Thanks for the help Woody!


  2. #2
    zpeters's Avatar
    Join Date
    Jul 2008
    Location
    bayville NJ
    Posts
    437
    yes it is a reverse thread i believe... Listen to the Woody!!

  3. #3
    Put a LONG pipe over the wrench. Leverage is the key, it will pop right off. Carl taught me this one, I use one that is 3 feet long and they come off very easily this way.

  4. #4
    "just sayin".. jetdave56's Avatar
    Join Date
    Nov 2008
    Location
    JERSEY SHORE
    Posts
    4,498
    +1
    619

    impeller removal

    scittb , right on money!

  5. #5
    Quote Originally Posted by scittb View Post
    Put a LONG pipe over the wrench. Leverage is the key, it will pop right off. Carl taught me this one, I use one that is 3 feet long and they come off very easily this way.

    yeah, I tried to find one in my garage but no luck. I will see what they have at Lowes this afternoon. I was pretty sure I was going the right direction but I did not want to pull out the big guns and be wrong then break something.

    Thanks guys.

  6. #6
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,347
    +1
    17
    Danger mouse's was stuck so i gave it a little heat when the normal 3 foot bar failed....just a little heat and it will expand and break free

  7. #7
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How To: Pump Removal
    By WildBill9000 in forum Sea Doo How To & FAQs
    Replies: 2
    Last Post: 04-05-2011, 09:16 PM
  2. How-To: Removing the engine cowling.
    By MikeTrin in forum Sea Doo How To & FAQs
    Replies: 8
    Last Post: 06-23-2005, 10:28 AM
  3. Removing scratches from gelcoat
    By Yuji in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-01-2005, 09:02 AM
  4. wear ring removal
    By watermedic in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 05-18-2005, 09:12 AM
  5. I need help remove stock intercooler
    By orc in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-13-2005, 04:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •