Thread: F-12 Wire Harness..HELP!
10-07-2009, 02:06 PM #1
F-12 Wire Harness..HELP!
I removed the engine from a F12 ski. Now ive got it back in and plugged the wire harness back in to all the connecters. Ive got it down to TWO conneters left they are both round with two prong.
the 1st connecter has a YELLOW w. Green Tracer, and a BLACK w. Red Tracer.
The 2nd connecter has a GREEN w. Yellow tracer, and a Grey solid
I know one goes to the sensor on the airbox, and the other goes to a sensor about the throttle boddies. Can anyone help me out and look at their ski and tell me which goes where?? Thank you in advance!!
10-07-2009, 02:37 PM #2
Also, I could use a little help getting the 4 injecter wires in the right place...The ski will start and idle but runs pretty rough when you rev it up. Standing on the left side of the ski looking right at the airbox, Im looking for the wire color codes on the wires to plug them in to the correct injecter, They are in this order now..From left (cylinder towards front) to right ( Cyl towards back ) All the injecter wires have a black with red tracer. The first one(far left has WHITE w.red tracer #2 WHITE w. blue tracer #3 WHITE w. green tracer #4 WHITE w black tracer.
Are these in the right order?? Im guessing not since its running ruough
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RXP Blur in forum 4-Tec PerformanceReplies: 2Last Post: 09-29-2007, 12:33 PM
By GreenMachine in forum 4-Tec PerformanceReplies: 1Last Post: 09-04-2007, 03:40 PM
By rxpvic in forum 2-Stroke PerformanceReplies: 2Last Post: 06-06-2007, 04:28 PM
By psycho rxp in forum 4-Tec PerformanceReplies: 5Last Post: 04-30-2007, 06:46 PM
By mrracing in forum 4-Tec PerformanceReplies: 2Last Post: 11-29-2006, 11:57 AM