Results 1 to 6 of 6
  1. #1

    Join Date
    May 2009
    Location
    essex uk
    Posts
    19

    100 hours........

    ok so both my rxp and rxt have hit 100 hours so is there any particular stuff i need to be checking or replacing,

    advise please....


  2. #2
    enforcer's Avatar
    Join Date
    Mar 2006
    Location
    San Antonio, Tx.
    Posts
    686
    +1
    22
    yes, you definately need a supercharger rebuid for both machines. Send them to Jerry on the online store he can help.

  3. #3
    richrxp's Avatar
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    949
    +1
    1
    Yes rebuilding the superchargers would be wise!

    The rebuilt kits contains the newer 08 specifications,do it yourself,or send it to Jerry for a rebuilt.

    If you decide to do it yourself you need some special tools to.

    Good luck.

  4. #4

    Join Date
    May 2009
    Location
    essex uk
    Posts
    19
    ok so superchargers need a look at, what needs replacing? i only just replaced the needle bearings in both of them when i upgraded the wheels,

    some have said i need to replace the shaft? is this so.....

    besides the s/c is there anything else i need to look at.... i would rather look and maintain now rather than have to replace later when it fails....

    dare i mention the carbon seal.... do they go past 100 hours ok.... i have checked both for leaks and they are ok at the moment.....

  5. #5
    richrxp's Avatar
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    949
    +1
    1
    If the carbon seal doesn't leak it's ok,100 hrs isn't that much.

    Supercharger is important,you can buy a complete rebuilt kit,

    http://www.4-tecperformance.com/inde...roducts_id=763


    everything is new except the housing and impeller,i have done a couple ,not to difficult to do.

    And the regular oilchange ,sparkplugs,oilfilter change wouldn't hurt either.

  6. #6

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Anyone with 100+ hours on a 1400 ?
    By mrbtd in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 11-27-2007, 06:40 PM
  2. To go Stage 3++ at 100 hours or not...?
    By ARNYGOLLOTT3 in forum 4-Tec Performance
    Replies: 16
    Last Post: 10-09-2007, 08:55 PM
  3. 2004 VirageI Engine Failure? ~100 Hours
    By grcmptrnrd in forum Polaris How To & FAQs
    Replies: 9
    Last Post: 09-25-2007, 08:15 PM
  4. Fercho V-Force 3 [100 Hour] Inspection
    By RX951 in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 12-25-2006, 11:12 AM
  5. 100 hour service question...?
    By GeoRXT in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 06-15-2006, 04:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •