10-09-2009, 11:04 AM #1
Differences in driveshafts RXT, RXP, RXT-X, RXP-X
Does anyone know the difference in the various driveshafts for the RXT, RXP, RXT-X, RXP-X? Does anyone have any side by side comparisons?
I know the only difference in the RXT and RXT-X shafts is the RXT-X is 2 inches longer otherwise both ends are identical.
10-09-2009, 02:15 PM #2
the rxt shafts are shorter and fatter than the p's. different placement for the c clip on the carbon seal too. splines are the same for all.
I can probably get you some pics if you need them.
10-09-2009, 03:15 PM #3
Yep, I know the RXT and RXT-X shafts are identical. I installed the RXT-X in my ski and the only difference was that the X was 2 inches longer over all.
10-09-2009, 03:25 PM #4
i don't have any complete shafts, just a few that have been cut for conversions, but they show teh key differences. I'm going away for teh weekend tonight. I'll try to snap a pic before i go. worst case, monday.
10-09-2009, 11:21 PM #5
- Join Date
- Aug 2009
10-10-2009, 07:02 AM #6
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Sosa62 in forum 4-Tec PerformanceReplies: 9Last Post: 08-20-2007, 09:08 PM
By ryan*9 in forum 4-Tec PerformanceReplies: 10Last Post: 07-20-2007, 05:59 PM
By BigWoody in forum Sea Doo Open DiscussionReplies: 0Last Post: 06-19-2007, 12:38 PM
By cue03 in forum 4-Tec PerformanceReplies: 12Last Post: 06-07-2007, 08:01 PM
By orange71rt in forum 4-Tec PerformanceReplies: 4Last Post: 08-02-2006, 09:58 PM