Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 32
  1. #1

    Another RXP part out red hull post up your needs

    I have a complete ski that I am parting out.

    I am keeping the following items for a conversion:

    Complete Engine and wiring harness.
    Gas Tank
    Driveshaft
    Main wiring harness.
    Handlebar wiring harness.
    Gauge and wiring harness.
    Speedo and internal wiring.
    Battery and cables.
    PEM and bracket and sensors.
    Temp sensor/buzzer
    Switch housing.
    Rear RXP engine mounts.
    J-pipe and hoses
    motor mount shims.
    All the hoses.
    Throttle Cable

    *I am also considering keeping the hood and the plastics below the hood for some custom painting. They were custom painted by the previous owner and do not look too good. They are only good for re-painting.


    Everything else is available. I will take close up pictures of the hull within the next few days. It is red. The hull has paperwork. No, I will not sell you just the paperwork. You will need to take the hull away with the paperwork.

    The seat is shot and is only good for reconvering, the handlebar pad is faded and so is the grab bar.
    The reverse cable is seized.

    This is somewhat time sensitive. I will start stripping the hull over the course of next week. Once stripped, the bare hull needs to go (I dont have space for it) as well as all of the items of value that I wont be using like the pump and etc. I am going to put a lot of it on ebay but want to give GH'ers first shot. I am very reasonable about pricing so dont heisitate to PM me about anything.
    Last edited by caliburst; 10-11-2009 at 02:57 PM.


  2. #2
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,625
    +1
    806
    Sorry for the OT, but what pump will you be using on the conversion? Depending on the level of mods you're planning, you might be able to find use out of a decked out HO pump that I have.

  3. #3
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Quote Originally Posted by twelvesorbetter View Post
    I have a complete ski that I am parting out.

    I am keeping the following items for a conversion:

    Complete Engine and wiring harness.
    Gas Tank
    Driveshaft
    Main wiring harness.
    Handlebar wiring harness.
    Gauge and wiring harness.
    Speedo and internal wiring.
    Battery and cables.
    PEM and bracket and sensors.
    Temp sensor/buzzer
    Switch housing.
    Rear RXP engine mounts.
    J-pipe and hoses
    motor mount shims.
    All the hoses.
    Throttle Cable
    I am also keeping the hood and the plastics below the hood for some custom painting.

    Everything else is available. I will take close up pictures of the hull within the next few days. It is red. The hull has paperwork. No, I will not sell you just the paperwork. You will need to take the hull away with the paperwork.

    This is somewhat time sensitive. I will start stripping the hull over the course of next week. Once stripped, the bare hull needs to go (I dont have space for it) as well as all of the items of value that I wont be using like the pump and etc. I am going to put a lot of it on ebay but want to give GH'ers first shot. I am very reasonable about pricing so dont heisitate to PM me about anything.
    The hull is red?

  4. #4

    Re: Another RXP part out red hull post up your needs

    Yep it's been painted. I'll post up some pics in a little bit

    It looks like an 07- red top, black bottom. Its an 05 model year ski.

  5. #5

    Re: Another RXP part out red hull post up your needs

    Here is the seller's picture



    Here are more:



    Heres a close up of the paint. There are some imperfections in it and some orange peel but its clean overall. there are no scratches or scuffs.

    Last edited by caliburst; 10-11-2009 at 02:58 PM.

  6. #6

    Re: Another RXP part out red hull post up your needs

    It also has a riva bov
    Last edited by caliburst; 10-12-2009 at 09:08 PM.

  7. #7
    ADAMBOMB's Avatar
    Join Date
    Mar 2006
    Location
    Sunrise,Florida
    Posts
    4,723
    +1
    196
    Does it have the original steering cable the big one not the skinny one? also hows the condition of it and price please private message me thanks,

  8. #8
    no reverse jayohentran's Avatar
    Join Date
    Mar 2008
    Location
    virginia
    Posts
    543
    +1
    1
    i've seen that ski somewhere before, but don't remember where. Are you selling the riva sponsons on it? (i see it has it in the picture)

  9. #9
    ebay-- i was gonna buy it! That was a pretty good buy!

  10. #10

    Re: Another RXP part out red hull post up your needs

    Quote Originally Posted by jayohentran
    i've seen that ski somewhere before, but don't remember where. Are you selling the riva sponsons on it? (i see it has it in the picture)
    No I'm keeping those sorry

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 07 viper red rxp part out
    By 9secZO6 in forum Sea Doo Classifieds
    Replies: 15
    Last Post: 07-03-2011, 04:10 AM
  2. FS 80+ 2005 RXP Part Out
    By meirvin in forum Sea Doo Classifieds
    Replies: 107
    Last Post: 11-21-2009, 07:05 PM
  3. FS: My 2Ruded RXP part out! Everything!
    By Water4fire in forum Sea Doo Classifieds
    Replies: 15
    Last Post: 08-10-2009, 05:01 PM
  4. Open Class RXP Part Out!
    By Seadooracer9 in forum Sea Doo Classifieds
    Replies: 30
    Last Post: 06-26-2009, 12:35 AM
  5. Seadoo Open Class RXP Part Out! Updated!!
    By Seadooracer9 in forum Sea Doo Classifieds
    Replies: 8
    Last Post: 06-14-2009, 09:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •