10-24-2009, 06:17 PM #1
Getting the adhesive off from under mats?
What are you guys using to clean the surfaces for the new mats???
Cant find anything that works good.....
10-24-2009, 06:20 PM #2
Goop-be-gone works good. The sign & lettering shops also have some stuff that they may sell you. I think they call it Orange Peel or something like that. The stuff works real good.
10-24-2009, 06:20 PM #3
I used 6 cans of carb cleaner , wont hurt the hull on a gpr, 6 plastic razor blades, 10 pair of rubber gloves,and a sailors vocabulary. Was a total bitch getting the glue off.
10-24-2009, 06:27 PM #4
Home depot sell Goo Gone comercial strength in aeresol cans... You'll thank me Lay paper towells on the glue and soak.. Let it sit for a few and it turns to a very moveable mess
10-24-2009, 06:34 PM #5
10-24-2009, 07:43 PM #6
- Join Date
- Jul 2007
- Pontoon Beach Illinois
I used a heat gun and a putty knife to get the layer of glue up, piece of cake, then used acetone to get rid of the sticky residue....
10-24-2009, 08:52 PM #7
10-24-2009, 09:33 PM #8
- Join Date
- Oct 2009
I use Acetone, let it sit for 10 minutes, then re-apply, let it sit again for 10 minutes then scrape it off with a puddy knife. Was really easy to do. Hope it helps.
10-24-2009, 11:33 PM #9
^^^ Best idea yet. Acetone is the best.
10-24-2009, 11:38 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By spaceman in forum Yamaha Open DiscussionReplies: 13Last Post: 07-10-2007, 03:08 PM
By havoc in forum Yamaha PWC Performance (2-stroke)Replies: 11Last Post: 02-11-2007, 12:41 AM
By joeblo in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 06-10-2006, 08:42 PM
By Yellow93 in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 05-01-2006, 05:00 PM
By Hydrotoys in forum Yamaha How To & FAQsReplies: 1Last Post: 12-17-2005, 09:57 PM