Results 1 to 10 of 10
  1. #1
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120

    07 steering and riva finger throttle with extenders

    I have a 07 steering assy for rxp/rxt with riva extenders and finger throttle for sale. Will seperate if need be. This steering set-up is a huge improvement over the 04-06 steering especialy if you are tall or like to stand up alot.
    The rear cover has 2 small joles drilled in it from a boost gauge bracket and also has some small nicks along the edge from a screw driver where the 2 halves go together and the bottom clip on each side is broken so the 2 pieces dont snap together as well as they should but are not loose. See pics of seem. It was like this when I got it and I just used a large blck zip tie around the base to hold it together tight and was not noticeable but the plastic covers are available pretty cheap if needed to be perfect.
    If using on 04-06 you will need to use your existing steering harness.


    Steering with extension and finger throttle $270 shipped
    bar extensions and finger throttle only $110 shipped
    steering only in stock form. $175 shipped
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	07 steering 001.jpg 
Views:	62 
Size:	556.9 KB 
ID:	157158   Click image for larger version. 

Name:	07 steering 002.jpg 
Views:	59 
Size:	560.8 KB 
ID:	157159   Click image for larger version. 

Name:	07 steering 005.jpg 
Views:	61 
Size:	802.5 KB 
ID:	157160  


  2. #2
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    pic of seam. Its the same on both sides.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	07 steering 003.jpg 
Views:	63 
Size:	605.3 KB 
ID:	157162  

  3. #3

    Join Date
    Oct 2008
    Location
    the Netherlands
    Posts
    7

    Steering stock

    I like it for my 06 RXT.
    Send to Holland?

  4. #4
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Quote Originally Posted by mvanarend View Post
    I like it for my 06 RXT.
    Send to Holland?
    Pm me your address. I'll check into it on monday.

  5. #5
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    TTT

  6. #6
    KC Blue Thunder's Avatar
    Join Date
    Oct 2007
    Location
    Jacksonville, Florida
    Posts
    2,079
    Hey Jeff did you ever sell the finger throttle.

  7. #7
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by Blue Thunder View Post
    Hey Jeff did you ever sell the finger throttle.
    It's Jim and he already sold them, I believe. I have a set of 05 bars with the extensions, finger throttle, and grips available though.

  8. #8
    Doel Tiburon1264's Avatar
    Join Date
    Nov 2007
    Location
    Jacksonville, Florida
    Posts
    2,343
    +1
    11
    Quote Originally Posted by bigdaddyRXP View Post
    It's Jim and he already sold them, I believe. I have a set of 05 bars with the extensions, finger throttle, and grips available though.
    Hi Bryan,

    I think Kc is looking for the finger throttle and bars extensions only to make the convertion on hes 2007 GTX Lt.

  9. #9
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by Tiburon1264 View Post
    Hi Bryan,

    I think Kc is looking for the finger throttle and bars extensions only to make the convertion on hes 2007 GTX Lt.
    My extensions will not come out of the bars, unless the bars are cut off of them. He's also going to need the cosmetic cover piece once he removes the stock thumb throttle.

  10. #10
    Doel Tiburon1264's Avatar
    Join Date
    Nov 2007
    Location
    Jacksonville, Florida
    Posts
    2,343
    +1
    11
    Quote Originally Posted by bigdaddyRXP View Post
    My extensions will not come out of the bars, unless the bars are cut off of them. He's also going to need the cosmetic cover piece once he removes the stock thumb throttle.
    You are right! If, I get my X setup would take care of Kc. I'm just waiting for some1 in the forum to post one up.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SOLD Riva Finger Throttle for GPR1200R with Cable
    By smacota1 in forum Yamaha Classifieds
    Replies: 4
    Last Post: 11-03-2015, 01:42 AM
  2. FS RXP/RXT/GTX/GTI Riva finger throttle with bar extensions steering setup
    By boostaholic in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 09-13-2012, 05:17 AM
  3. FS Riva Finger Throttle, Dynotune Boost Gauge, RXP Steering
    By ultramaxracing05 in forum Sea Doo Classifieds
    Replies: 10
    Last Post: 07-12-2011, 11:14 PM
  4. My Riva finger throttle install with pics. '07 RXT.
    By mksmi in forum 4-Tec Performance
    Replies: 17
    Last Post: 10-13-2009, 08:15 AM
  5. ODI Grips issue with RIVA Finger throttle kit
    By MIARider in forum 4-Tec Performance
    Replies: 22
    Last Post: 02-09-2008, 06:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •