11-01-2009, 05:01 PM #1
Rebuild 1100 Crankshaft or buy used One
I have a broken 1100 crankshaft. Would it be more cost effective to rebuild it or buy a used one?
11-01-2009, 05:05 PM #2
11-01-2009, 05:10 PM #3
How many hours do you typically get out of a crankshaft. I'm afraid if I buy a used one I won't get a season out of it?
11-01-2009, 05:12 PM #4
I used a rebuilt one from SBT and put about 250 hours of WOT on it before I sold it. I had zero issue...and the quality looked good. I know there are haters...but I'm just referencing the one I had from them worked great.
11-01-2009, 05:19 PM #5
I would get a new crank I wouldnt rebuild it.
Is your front crank bearing still good by any chance
I have a 1200 crank thats interchangable with the 1100 crank but I have no front bearing.
I would be interested in selling you the crank for $175 or posibbly buying you old crank bearing from you if its still good.
Then sell the old crank as a core
11-01-2009, 05:27 PM #6
11-01-2009, 05:55 PM #7
I know the crank bearings are dont see why the cranks would be diferent unless the stroke was diferent.
If it didnt fit I would let you return it and split shiping you pay one way I pay the other.
Its a good crank I swaped it out for a T/W. one.
11-01-2009, 07:01 PM #8
I think Mike P. has convinced me into the SBT. However, I'd be more than willing to sell you my front bearing. I don't have the ski in front of me, but I believe the middle one was the one that gave out so the other two front and back were fine.
11-01-2009, 07:03 PM #9
Trust me when I say there will be 1,0000 folks say stay away from SBT...but, it was my only option at the time and the old "Raider" I had was very very fast..and was one of the fastest pump gas set up's back in early 2000 It was rode in the Rivers of FL and was I would guess 95% WOT the entire 250+hours I used it prior to selling it to another guy. Never had a single issue....EVER. IS there stuff as good as OEM...NO...but it's a good option for $350 and comes with a warranty
11-01-2009, 07:05 PM #10
How much $$$ I am watching a 1100 and a 1200 front crank bearing on ebay just now I might get a new one.
How many hours on yours aprox.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By bnovak in forum Yamaha Old School SkisReplies: 12Last Post: 10-22-2007, 06:38 PM
By FLjoyrider in forum Polaris Open DiscussionReplies: 3Last Post: 08-27-2007, 07:56 AM
By camar0 in forum 4-Tec PerformanceReplies: 27Last Post: 04-14-2007, 07:18 PM
By yamadoo2 in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 02-22-2007, 10:06 PM
By jeff007 in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 03-05-2006, 09:06 PM