11-06-2009, 06:21 PM #1
How to fill gap in console on Sportster 150?
I've got a big gap where my console joins. It was originally filled with some glued in molding. After a rough day on Lake Maurepas, which made my hull flex a good bit, the molding had broken loose. The old molding has gotten pretty hard and inflexible. I've tried a couple of things to replace it, but it hasn't worked very well so far. Here is a picture of the gap and the old molding.
Has anyone else had the same problem and fixed it?
11-06-2009, 09:32 PM #2
- Join Date
- Jul 2008
- cold spring NY
mine is like that to.
dose your lid stay up or slam because i found a way to fix it
11-07-2009, 09:29 AM #3
The screws holding it on have pulled out. if you look inside youll see that the srews have pulled out.
11-07-2009, 03:50 PM #4
Do you know where I could find some similar molding? The original molding to too hard and brittle to reuse.
11-07-2009, 03:51 PM #5
03-22-2010, 12:35 PM #6
I made a clasp to hold it down, I can post pictures if you're curious.
03-29-2010, 01:38 AM #7
- Join Date
- Oct 2008
I'd be interested in seeing your solution
04-02-2010, 09:33 AM #8
I put a stainless L bracket on mine, on the inside. I had the same issue and also gluded it and filled the gap with 3m brand 5200 its rock solid and the gap is tight now, No more issues.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ChewsteR in forum Sea Doo Sport BoatsReplies: 3Last Post: 12-18-2007, 01:56 PM
By rxtscott in forum Sea Doo Sport BoatsReplies: 6Last Post: 12-02-2007, 09:29 PM
By Jimmy in forum Sea Doo Sport BoatsReplies: 2Last Post: 07-17-2007, 01:35 PM
By Jimmy in forum Sea Doo Sport BoatsReplies: 0Last Post: 07-10-2007, 01:11 PM
By twinstack1 in forum Kawasaki Tech Tips and InfoReplies: 2Last Post: 06-22-2007, 12:45 PM