11-06-2009, 09:26 PM #1
Pirannah Front Mount $40 But.....
You are going to have to figure out how to get the plug back in there. The threads are fine and the outside is ok there is a mark on it from the engine hitting but otherwise fine.
Great for someone creative
11-07-2009, 10:36 AM #2
my idea for someone who is tapped out on the mod budget to fix it themselves..dont risk your rep by selling it. I would heat the case in oven at 140 and freeze the plug. Then place in a press and grease the inside of the case with a layer of just mixed metal to plastic epoxy from oreilly's auto parts or wherever and put the plug in there right away and press it in slowly. Let it sit overnight and then ready to install.
you could use a vise and a pc of board instead of a press..it shouldn't take much if you work quickly.
11-07-2009, 10:38 AM #3
yup, freeze the rubber and warm up the mount, use a vise or press with epoxy
11-07-2009, 10:50 AM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By bruinsrme in forum 4-Tec PerformanceReplies: 44Last Post: 10-14-2007, 09:40 PM
By mstennes in forum 4-Tec PerformanceReplies: 24Last Post: 09-20-2007, 11:38 PM
By Madjamr in forum 2-Stroke PerformanceReplies: 2Last Post: 09-14-2007, 09:09 AM
By VX1 in forum 4-Tec PerformanceReplies: 2Last Post: 07-10-2007, 05:30 PM
By terryt in forum 4-Tec PerformanceReplies: 3Last Post: 02-28-2006, 10:28 AM