Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    bowsniper's Avatar
    Join Date
    Aug 2008
    Location
    macomb,michigan
    Posts
    5,896
    +1
    6

    Flywheel puller.

    Can Someone like (Beerdart), won't mention any names... Make a Simple billet triangle with 3 holes in it.a center taped hole with a grade 8 center bolt and 3 -grade 8 tapped holes and bolts and washers!. I'll buy one! Kinda like the BE ALL for pulling these stuck cranks!. ie...Highoctane, Mine was a Pain too. Maybe even make it so you cant screw the outer bolts thru the thing so it doesn't hit the stator wires behind it. It would be cool to get some Beerdart bling on it too!. You could put on it something like....FOR 785 USE ONLY!. lol

    Now taking orders! 1 so far!


    I want to pull this 750 blocks' crank out and my puller is wasted.! lol


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,595
    +1
    1,276
    Why not use the heavy duty puller than Randy sells?

    Everyone who has one seems to like it.
    Probably will last a lifetime, too.


  3. #3
    bowsniper's Avatar
    Join Date
    Aug 2008
    Location
    macomb,michigan
    Posts
    5,896
    +1
    6
    It doesn't come with Beerdart Bling though! I heard it works good. About 30.00? Hmmm. We'll see when Beerdart chimes in on this.!! He does'nt even know he's making one yet!.

  4. #4
    SPEED KILLS, BUT YOU GET THERE QUICKER Keddano's Avatar
    Join Date
    Jul 2007
    Location
    Cedar Rapids,Iowa
    Posts
    6,381
    +1
    23
    The billet Alumium would not be as strong as a good steel one, For the puller bolt it would have to be Heli-coiled for the threads and still would be weaker then steel. Now really,who cares about Bling when your in the garage trying to get a #%[email protected]& flywheel off,you just want the job done. Want Bling? Get randy's and send it out for triple nickel Chrome plating.

  5. #5
    FLjoyrider's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    555
    I have a stainless one I made from a peice of 1/2" thick plate, cut 6" diameter, 3-3/8" slots at 120 degrees apart. has a 3/4" fine threaded grade 8 bolt in the middle and hasnt failed me yet. breaker bar and BFH is all it usually takes. Fits lots of other stuff too including car flywheels and flex plates. Mine doesnt have the open ends on the slots like randy's does tho

  6. #6
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    You dont want to see what I use Get the Watcon one and never look back..

  7. #7
    bowsniper's Avatar
    Join Date
    Aug 2008
    Location
    macomb,michigan
    Posts
    5,896
    +1
    6
    lol . is randys 30.00? anyone ever buy one?

  8. #8
    Lake Mead Bum & BTLS Mark starflight's Avatar
    Join Date
    May 2007
    Location
    Boulder City, NV
    Posts
    3,364
    +1
    1
    Quote Originally Posted by bowsniper View Post
    lol . is randys 30.00? anyone ever buy one?
    http://www.watcon.com/Catalog_Pages/Flywheel_Puller.htm

  9. #9
    Race, wreck, repeat delagem's Avatar
    Join Date
    Aug 2006
    Location
    Homer, NY
    Posts
    728
    +1
    2
    I've mentioned this before, I bought a $9 steering wheel/harmonic balancer puller. Once I replaced the bolts with some decent grade 5 bolts, it's worked very well....

  10. #10
    I'D RATHER SWEAT THAN SHIVER hyoctane23's Avatar
    Join Date
    May 2007
    Posts
    1,976
    +1
    34
    Just be sure you don't use crappy bolts from any chain hardware stores....or this happens (assuming they don't break!). They are even 12.9 grade, too.


Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Flywheel Puller
    By gruvjet in forum Polaris Open Discussion
    Replies: 2
    Last Post: 06-03-2008, 07:55 AM
  2. RAD flywheel puller
    By L Carlson in forum Yamaha Open Discussion
    Replies: 3
    Last Post: 01-12-2008, 08:00 PM
  3. Flywheel Puller?
    By bryan428 in forum Polaris How To & FAQs
    Replies: 4
    Last Post: 10-29-2007, 03:13 PM
  4. flywheel puller
    By sea~smith in forum Polaris Open Discussion
    Replies: 1
    Last Post: 08-29-2007, 11:12 PM
  5. Flywheel puller?
    By porksword in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 01-09-2007, 10:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •