Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21
  1. #1

    Join Date
    Apr 2008
    Location
    plattsburgh ,ny
    Posts
    75
    +1
    1

    wanted marina 580 intake manifold

    Wanted marina 580 intake manifold, single carb design... WITH SIDE BRACKET FOR THROTTLE

    THERE must be one floating around somewhere guys!


  2. #2
    maxadrenaline's Avatar
    Join Date
    Nov 2007
    Location
    RETIRED !! In Mobile AL or Wherever I Want To Go
    Posts
    1,414
    +1
    137
    Do you mean "mariner" ? That was a brand in the early days. Try Dunnavants Performance in Birmingham, Alabama. Brian used to have a ton of manifolds.

  3. #3
    Wetracer's Avatar
    Join Date
    Dec 2006
    Location
    Pacific Northwet
    Posts
    156

    Single 44 Intake Manifold

    I have 2 Brand NEW WestCoast single 44 manifolds. $75 each. Mike

  4. #4

    Join Date
    Apr 2008
    Location
    plattsburgh ,ny
    Posts
    75
    +1
    1
    okay here's the thing....the aftermarket intake manifold must have at least two inches worth of clearance from the main body to the tip of the carb mounting flange... the reason behind this is.... that it will allow me to thread a fitting through below the flanger surface area..for the boost bottle install...the stock manifold dosen't allow a flat surface large enough to install fittings...


    PICTURE ARE WORTH A THOUSAND WORDS... PLEASE1

  5. #5
    Make a spacer for the boost bottle. Put a spacer between the carb and stock manifold.

  6. #6

    Join Date
    Apr 2008
    Location
    plattsburgh ,ny
    Posts
    75
    +1
    1
    That's very true but considering how much it would cost a machinist to manufacture one part..would be more than double the cost of buying the aftermarket intake manifold $75 marina, etc..

    thanks... it was a good thought unless someone is making carb spacer in bulk for my very old 1995 sp

  7. #7
    It could be done for less than $20. Heck I might can make you one... I have a yellow 587 manifold and carb though. I don't think that even a carb spacer for a yellow motor will work on the white.

  8. #8
    Mark22's Avatar
    Join Date
    Sep 2009
    Location
    Springfield, MO
    Posts
    191
    If you can draw me a sketch of what you want in a carb spacer, I might be able to make one with my EDM at school. An EDM machine is basically a CNC cutter that works like a hot-wire foam cutter only an EDM cuts metal. I can cut any flat pattern to within a few thousandths. I'm not real familar with the 580 manifold so I might need some help in getting the design right.

  9. #9
    KrunchovXPL-GTX-RX's Avatar
    Join Date
    Mar 2009
    Location
    Aiken, SC
    Posts
    1,391
    +1
    1
    Quote Originally Posted by Mark22 View Post
    If you can draw me a sketch of what you want in a carb spacer, I might be able to make one with my EDM at school. An EDM machine is basically a CNC cutter that works like a hot-wire foam cutter only an EDM cuts metal. I can cut any flat pattern to within a few thousandths. I'm not real familar with the 580 manifold so I might need some help in getting the design right.

    Are you serious? With all the guys modding up 580s these days, or ever, for that matter, you should know them inside and out.

    Oh, wait.

    Does anyone mod 580s? That is, other than throwing them on the ground to make room for the 717 they are going to put in the boat instead.

  10. #10
    Mark22's Avatar
    Join Date
    Sep 2009
    Location
    Springfield, MO
    Posts
    191
    Hey, I'm just trying to help... All I have is a 97XP with a 787 and a 96HX with a 717. I've never seen a manifold off of a 580. I really could care less about what engine someone is trying to mod. To each his own.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. zxi 1100 intake manifold/parts wanted
    By Mulefoot in forum Kawasaki PWC Performance (2-stroke)
    Replies: 1
    Last Post: 03-16-2012, 08:07 AM
  2. WTB Stock 215 intake manifold wanted
    By Turbo Nick in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 02-02-2011, 07:05 AM
  3. WTB 08 RXTX intake manifold wanted
    By Otto J in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 10-09-2010, 12:46 AM
  4. Wanted Wetjet 61x Intake Manifold
    By standup4ever in forum Yamaha Classifieds
    Replies: 10
    Last Post: 06-01-2010, 02:29 PM
  5. Wanted:760/44 Single Carb Intake Manifold
    By kdxcookie in forum Yamaha Classifieds
    Replies: 1
    Last Post: 11-04-2008, 10:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •